Bedienungsanleitung Parkside PZKS 1500 B2 - IAN 280657 (Seite 91 von 106) (Deutsch, Englisch, Holländisch, Französisch)

706372

Zoom out

Zoom in

Vorherige Seite

1/106

Nächste Seite

GB / IE / NI

29. Screw for workpiece support

30. Fastening bolt

31. ON/OFF switch for laser

32. Adjustment screw (90°)

33. Screw for stop rail

34. Adjustment screw (45°)

35. Flange bolt

36. Outer flange

37. Saw shaft lock

38. Inner flange

39. Screw for Laser fixing

a) 90° stop angle (not supplied)

b) 45° stop angle (not supplied)

c) Locking nut

d) Allen key, 6 mm

e) Allen key, 4 mm

3. Scope of delivery

• Openthepackagingandremovethe

device carefully.

• Removethepackagingmaterialaswell

as the packaging and transport bracing

(if available).

• Checkthatthedeliveryiscomplete.

• Checkthedeviceandaccessoryparts

(Fig. 3) for transport damage.

• Ifpossible,storethepackaginguntilthe

warranty period has expired.

ATTENTION

The device and packaging materials are

not toys!Children must not be allowed

to play with plastic bags, film and small

parts! There is a risk of swallowing and

suffocation!

•Slidingcrosscutmitresaw

•2xClampingdevice

•2xWorkpiecesupport

•Sawdustbag

•Allenkey6mm

•Allenkey4mm

•2xcarbonbrush

•Operatingmanual

•Mitrelockhandle

•Carryhandle

•2xscrewsforcarryhandle

4. Intended use

The sliding cross cut mitre saw is designed to

crosscut wood and plastic respective of the

machine’s size.The saw is not designed for

cutting firewood.

Warning!

Not use the saw to cut materials

other than those specified described in

manual.

Warning!

The supplied saw blade is only

intended for the sawing of wood! Do not use

this blade for the sawing of plastic!

The equipment is to be used only for its

prescribed purpose. Any other use is deemed

to be a case of misuse. The user / operator

and not the manufacturer will be liable for

any damage or injuries of any kind caused

as a result of this.

The equipment is to be operated only with

suitable saw blades. It is prohibited to use

any type of cuttingoff wheel.

To use the equipment properly you must also

observe the safety information, the assembly

instructions and the operating instructions

to be found in this manual. All persons who

use and service the equipment have to be

acquainted with this manual and must be

informed about the equipment’s potential

hazards. It is also imperative to observe the

accident prevention regulations in force in

your area. The same applies for the general

rules of health and safety at work.

The manufacturer will not be liable for any

changes made to the equipment nor for any

damage resulting from such changes. Even

when the equipment is used as prescribed it

is still impossible to eliminate certain residual

Scope of delivery/Intended use

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PZKS 1500 B2 - IAN 280657 Seite 91

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info