Bedienungsanleitung Parkside PZKS 1500 B2 - IAN 295934 (Seite 99 von 110) (Deutsch, Englisch, Holländisch, Dänisch, Französisch)

706364

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

GB / IE / NI

of rotation.

4 Do not use any insertion tools with

cracks. Sort out cracked insertion tools.

Repairs are not permitted.

5 Clean grease, oil and water off of the

clamping surfaces.

6 Do not use any loose reducing rings or

bushes for the reducing of holes on saw

blades.

7 Make sure that fixed reducer rings for

securing the insertion tool have the same

diameter and have at least 1/3 of the

cutting diameter.

8 Make sure that fixed reducer rings are

parallel to each other.

9 Handle insertion tool with caution.

They are ideally stored in the originally

package or special containers. Wear

protective gloves in order to improve grip

and to further reduce the risk of injury.

10 Prior to the use of insertion tools, make

sure that all protective devices are

properly fastened.

11 Prior to use, make sure that the insertion

tool meets the technical requirements of

this electric tool and is properly fastened.

12 Only use the supplied saw blade for

cutting wood, never for the processing of

metals.

Attention: Laser radiation

Do not stare into the beam

Class 2 laser product

laser specification according to

EN 60825-1:2014

: 650 nm P ≤ 1 mW

LASER

This laser radiation label located above

the laser. See fig.1 No.(40).

Protect yourself and you environment

from accidents using suitable

precautionary measures!

Repairs may only be carried out by

the manufacturer or an authorized

representative.

- Do not remove any cutting residues or

other parts of workpieces from the cutting

zone while the machine is running and

the saw unit is not at rest.

Instructions for proper and safe sawing:

a) Clamp the workpiece always at the saw

table firmly. Therefore please use the

supplied clamping device.

b) Before each cut, ensure that the machine

is stable.

c) If necessary attach the machine to

a workbench or the like. Fasten the

machine to the workbench.

d) Support long workpieces (e.g. with a

roller table) to prevent them sagging at

the end of a cut.

e) Make sure that the saw blade does not

touch the rotary table in any position by

pulling out the mains plug and rotating

the saw blade by hand in the 45° and

90° position. If necessary, readjust the

saw head.

WARNING!

This electric tool generates an

electromagnetic field during operation. This

field can impair active or passive medical

implants under certain conditions. In order to

prevent the risk of serious or deadly injuries,

we recommend that persons with medical

implants consult with their physician and the

manufacturer of the medical implant prior to

operating the electric tool.

SAFETY INSTRUCTIONS FOR THE

HANDLING OF SAW BLADES

1 Only use insertion tools if you have

mastered their use.

2 Observe the maximum speed. The

maximum speed specified on the

insertion tool may not be exceeded.if

specified,observe the speed range

3 Observe the motor / saw blade direction

Safety information

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PZKS 1500 B2 - IAN 295934 Seite 99

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info