• Insert the black test lead banana plug into
the negative COM jack.
• For current measurements up to 6000 μA
DC, set the function switch to the μA position
and insert the red test lead banana plug into
the μA/mA jack.
• For current measurements up to 600 mA
DC, set the function switch to the mA
position and insert the red test lead banana
plug into the μA/mA jack.
• For current measurements up to 10 A DC,
set the function switch to the 10 A position
and insert the red test lead banana plug into
the 10 A jack.
• Press the MODE button to indicate on
the display.
• Read the current in the display.
: Do not make 10 A current
measurements for longer than 30 seconds.
Exceeding 30 seconds may cause damage to
the meter and/or the test leads.
• Insert the black test lead banana plug into
the negative COM jack.
• For current measurements up to 6000 μA
AC, set the function switch to the yellow μA
position and insert the red test lead banana
plug into the μA/mA jack.
• For current measurements up to 600 mA
AC, set the function switch to the yellow mA
position and insert the red test lead banana
plug into the μA/mA jack.
• For current measurements up to 10 A AC,
set the function switch to the yellow 10 A
position and insert the red test lead banana
plug into the 10 A jack.
• Press the MODE button to indicate on
the display.
• Read the current in the display.
