Bedienungsanleitung Peaq PMO S241-IFC (Seite 11 von 86) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch)

783305

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

ENGLISH

• Refer all servicing to an authorised service agent.

Do not attempt to repair the product yourself.

Servicing is required when the product has been

damaged in any way, such as the supply cord

or plug are damaged, liquid has been spilled,

objects have fallen into the product, the enclosure

is damaged, the product has been exposed to

rain or moisture, does not operate normally, or

has been dropped.

• Before connecting the product to a socket outlet,

make sure the voltage indicated on the product

corresponds to your local mains.

• If the supply cord is damaged, it must be replaced

by the manufacturer or its service agent or a

similarly qualiﬁed person in order to avoid hazard.

• Regularly check if the supply cord, product or

extension cable is defective. If found defective, do

not put the product into operation. Immediately

pull the plug.

• Place the supply cord and, if necessary, an

appropriate extension cable in such away that

pulling or tripping over it is impossible. Do not

allow the supply cord to hang down within easy

reach.

• Do not jam, bend or pull the supply cord over

sharp edges.

• The power plug is used as the disconnect

device; the disconnect device shall remain readily

operable. To completely disconnect the power

input, disconnect the mains plug.

• The product may not function properly or not

react to the operation of any control due to

electrostatic discharge. Switch o and disconnect

the product; reconnect after a few seconds.

• Protect the supply cord from being walked on

or pinched particularly at the plug, convenience

receptacles and the point where it exits from the

product.

• Never pull the plug by the supply cord or with

wet hands.

• Disconnect the power plug in case of faults

during use, during lightening storms, before

cleaning and when not using the product for a

longer period of time.

• Danger! Before cleaning, switch the product o

and disconnect the power plug from the socket.

• When the product has reached the end of its

service life, make it defective by disconnecting

the plug from the socket and cutting the cord in

two.

Intended use

This product is designed as a monitor only.

For sound playback additional headphones or

speakers, possibly with its own power supply, are

required.

The product is not intended for any commercial

or industrial use. Do not use it for other purposes.

Any other use might lead to damage of the product

or personal injury. The Imtron GmbH assumes no

liability for damage to the product, for property

damage or for personal injury due to careless

or improper usage of the product, or usage of

product which does not meet the manufacturer’s

speciﬁed purpose.

IM_PMO-S241_S271-IFC_201127_V03_HR.indb 11IM_PMO-S241_S271-IFC_201127_V03_HR.indb 11 27/11/2020 11:21 AM27/11/2020 11:21 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Peaq PMO S241-IFC Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info