Bedienungsanleitung Peaq PTV551203 (Seite 38 von 249) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch)

532635

Zoom out

Zoom in

Vorherige Seite

1/249

Nächste Seite

- Channel number: use

◄

►

to select the

channel number.

- Start date: use the alphanumeric buttons to set

the recording date.

- Start time: set the starting time of the recording.

- Stop time: set the stopping time of the

recording.

- Schedule type:

t4et Reminder to be reminded that you can

switch to the scheduled programme when the

time you

have set comes. When time is out and

you

do not execute any operation, the dialog

box will disappear and no further operation will

be executed.

t4et Record to check if you really want to

start your scheduled recording when the time

you

have set comes. When time is out and

you

do not execute any operation, scheduled

recording will start automatically.

- Repeat type: set different repeat modes

for the

recording.

4. Press

▲

▼

◄

►

to select Add, then press OK to

add the schedule you set into your schedule list.

5. Press the red button to repeat above procedures

to add another schedule.

6. If you wish to edit or delete a schedule, select it

and press OK to enter.

7. Press

EXIT to close the menu.

Network connection

You can set up your TV so that it can access the

Internet through your local area network (LAN) using

a wired or wireless connection.

Connecting to a wired network

You can attach your TV to your LAN using cable in

three ways:

t You can attach your TV to your LAN by

connecting the LAN port on your TV to an external

modem using a Cat 5 cable.

t You can attach your TV to your LAN by

connecting the LAN port on your TV to an IP

Sharer, which is connected to an external modem.

Use Cat 5 cable for the connection.

t Depending on how your network is conﬁgured,

you may be able to attach your TV to your LAN by

connecting the LAN port on your TV directly to a

network wall outlet using a Cat 5 cable. Note that

the wall outlet is attached to a modem or router

elsewhere in your house.

Select Setup > Network > Settings > Interface,

then select Ethernet to connect to a wired network.

Connecting to a wireless network

To connect your TV to your network wirelessly, you

need a wireless router or modem and a Wireless

LAN Adapter. Connect your Wireless High-Gain USB

Adapter (USB dongle) delivered with your TV to your

TV’s USB 1 port.

1. Select Setup > Network > Settings > Interface,

then select Wireless to connect to a wireless

network.

2. Select Wireless setting and press OK/

►

enter.

3. Connection Methods: You can setup the wireless

network connection three ways.

- Scan

tSelect Wireless setting > Scan, then press

OK/

►

, the TV will scan all access points within

range. The access points found by the TV will

be displayed.

tSelect an available access point, then press

OK/

►

to connect the TV.

Notes:

- If you select a protected access point, you will

have to enter the corresponding password.

Press OK on the remote control to display the

virtual keyboard to enable you to enter the

password.

- This set has a memory function of available

access point, which enables your set to be

connected to the network even if you switch

on the TV after power off.

- Manual

Select Wireless setting > Manual, then press

OK/

►

, you will be prompted to enter the correct

SSID of an available wireless router to set up the

connection.

- Auto

If your AP supports WPS (Wi-Fi Protected

Setup), you can connect to the network via PIN

(Personal Identiﬁcation Number) or PBC (Push

Button Conﬁguration). WPS will automatically

conﬁgure the SSID and WPA key in either mode.

Select Wireless setting > Auto, then press

OK/

►

to enter.

tPIN: Select PIN and press OK/

►

to enter.

Generate a random PIN code. Make sure

this code is installed on the AP. (For the

procedures, refer to your router manual.) Press

OK/

►

again to set up the connection.

tPBC: If your router has a PBC push button,

select PBC, then press OK/

►

to enter. Press

the PBC push button on your router within 2

minutes after you press OK/

►

again. Your TV

will automatically acquire all the network setting

values it needs and connect to your network.

Network setup

1. Press MENU on the remote control and select

Setup > Network > Settings > Internet

connection. Press

◄

►

to select On. Wait until

the connection is automatically established.

Network connectionChapter 6

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Peaq PTV551203 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info