564368
24
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite

Controls the overall volume level of the amplier.

Adjusts the low-frequency damping factor of the power amplier, which gives the amp a "tighter" sound
when fully dialed counter clockwise and an increasingly "looser" sound when adjusted clockwise.

Adjusts the high frequency damping factor of the power amplier, which gives the amp a "mellow" char-
acter when fully counter-clockwise and more of "biting" or forward character when rotated clockwise.

This switch turns on the high-voltage supply on or off, with up being the ON position. The preamp and DI
will still function when this switch is off.
TIP: Always allow at least 5 minutes of warm-up time before switching the STANDBY switch on. This will
improve performance and reliability of the power tubes.

Turns the unit on or off, with up being the ON position.
Caution: The on/off switch in this unit does not break both sides of the primary mains. Hazardous energy
can be present inside the chassis even when the on/off switch is in the OFF position.

Your AC mains cord plugs in here. The VB-3 has a proprietary universal switch mode power supply that ac-
cepts AC line voltages from 100 VAC to 240 VAC, at 50-60 Hz for correct operation in ANY country with the
proper IEC mains cord/plug.

The mains cord supplied with the unit is a heavy-duty, three-conductor type with a conventional 120 VAC
plug with ground pin. It should be connected to an independent circuit capable of continuously supporting
at least 15 amps. This is particularly critical for sustained high-power applications. If the outlet used does
not have a ground pin, a suitable adapter should be used and the third wire grounded properly. All appara-
tus with class 1 construction shall be connected to a mains socket with a protective earthing connection.
16
2
17
18
19
20

16
17 16 19 20
1
2
24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Peavey VB-3 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info