Bedienungsanleitung Peavy IPR2 5000 (Seite 21 von 44) (Englisch)

564342

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

IPR2

™

5000 / 7500

Power Amplifier

Congratulations on your purchase of an IPR2

™

power amplifier, designed for years of reliable, flawless operation under rigorous use. The

groundbreaking IPR series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output

power, reliability and thermal efficiency. IPR Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D

topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers the sonic superiority and unsurpassed

reliability for which Peavey is famous, in an extremely efficient and lightweight design. Advanced technology and extensive protection circuitry

allow operation with greater efficiency into difficult loads and power conditions. The DDT

™

(Distortion Detection Technique) circuitry ensures

trouble-free operation into loads as low as 2 ohms. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload

conditions. The IPR’s high-efficiency design allows the amplifier to operate at very low temperatures, and does not require massive heat sinks to

cool. For your safety, read the important precautions section, as well as input, output and power connection instructions.

Although the IPR amplifier is simple to operate and housed in an ultra-strong, ultra-lightweight chassis, improper use can be dangerous. This

amplifier is very high- powered and can put out high voltages and sizable currents at frequencies up to 30 kHz. Always use safe operating

techniques when operating this amplifier.

Before you send signal through your amplifier, it is very important to ensure that the product has the proper AC line voltage supplied. You can find

the proper voltage for your amp printed next to the IEC line (power) cord on the rear panel of the unit. Each product feature is numbered. Refer to

the front-panel diagram in this manual to locate the particular features next to its number.

Please read this guide carefully to ensure your personal safety as well as the safety of your amplifier.

ENGLISH

VENTILATION: For proper ventilation, allow 12" clearance from nearest combustible surface.

Make sure that vents are not blocked and air can flow freely through the unit.

FEATURES:





















WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or and experienced radio/TV technician for help.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Peavy IPR2 5000 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info