Bedienungsanleitung Peg Perego Book 3W (Seite 18 von 72) (Alle Sprachen)

626124

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

WARNING! If this operation is not completed properly,

the basket will not support any weight.

Fasten the front basket flaps to the grey buttons on

the frame (fig_g) and then secure the basket centrally

to the footrest using the Velcro strap (fig_h).

6 HOOD: Fasten the hood at the back using the Velcro

strip (fig_a), insert the hood attachments into their

slots (fig_b), secure with the external rubber band to

the buttons on the inside of the handlebar (fig_c), and

finally button the hood laterally to the frame (fig_d).

7 FIXED OR SWIVEL FRONT WHEELS: to fix the front

wheels, rotate the lever counter clockwise to the

locked padlock (fig_a); to release the wheels, turn the

lever clockwise to the unlocked padlock (fig_b). On

difficult terrain, we recommend using fixed wheels.

8 BOOK CROSS BRAKE: To engage the brake, pull the

handle on the handlebar towards you (arrow_a) and

block the red lever (fig_b); to release the brake, release

the lever (arrow_c). Always engage the brake when

stationary. To adjust the brake making it more rigid,

loosen the regulator (fig_d) located on the handlebar by

screwing it outwards. To loosen and soften the brake, do

the opposite.

9 BOOK 3W BRAKE: Press the lever down to apply the

brake on the chassis and lift it to release the brake.

10 ADJUSTABLE HANDLEBAR: To adjust the height of the

handlebar, press both of the side buttons at the same

time (fig_a) and swing it into the desired position

(fig_b), then release the buttons.

11 FOOTREST: before adjusting the foot rest, ensure its

cover is accurately fitted; if it isn’t, fit it accordingly. To

lower the footrest push the two levers downwards and

then push the footrest downwards (fig_a); to raise the

footrest lift it upwards (fig_b).

12 FRONT BAR: To pull the front bar out by one position,

press the button as shown and pull outwards (fig_a).

To remove the front bar, pull it out to the second

position and remove (fig_b). Open-close front bar: pull

out on one side and rotate.

13 HOOD: The hood comes with a loop for hanging your

child's favorite toy (fig_a) and a see-through window

for observing your child (fig_b), which can be lifted

and fastened. You can detach the Velcro, roll up the

back of the hood and fasten it at the top with the

rubber band to allow greater ventilation during use

with the backrest down (fig_c). The hood may be

pulled forward into several positions (fig_d).

14 ADJUSTING THE BACKREST: to lower the backrest,

press the clip and the backrest will move down to the

desired position.

To raise the backrest, press the clip and lift the

backrest to the desired height.

15 FOOT MUFF: To secure the foot muff to the stroller,

button the rubber band to the side bar (fig_a) and

button the top part of the foot muff to the inside

button (fig_b).

16 FIVE POINT SAFETY HARNESS: To fasten it, push the two

waist strap buckles (with the shoulder straps attached

– arrow_a) into the leg divider until they click into place

(arrow_b). To unfasten it, press the round button in the

centre of the buckle (arrow_c) and pull the waist straps

out (arrow_d).

17 To tighten the waist strap, pull on both sides in the

direction of the arrow (arrow_a). To loosen it, move it

in the opposite direction.

18 Before adjusting the height of the safety harness

remove the shoulder pads (fig_a). To adjust the height,

slip the belts through the eyelet in the fabric (fig_b)

and position them in the most suitable eyelet.

19 FOLDING UP: To fold up the stroller, you must ensure

the front wheel swivels and the hood are closed, when

fastened. Place the handle as shown in the figure (fig_a).

Pull the inside handle on the base (fig_b) and lift it (fig_c);

the handle will drop forward until the frame is closed.

20 To close correctly, check the side hook is inserted

(fig_a). If not automatically locked, compress the

chassis slightly. When folded, the stroller will free

standing (fig_b).

21 For greater compactness, it is possible to remove the

wheels.

To remove the rear wheels: pull the pivot outwards and

remove the wheel as shown in the figure (fig_a).

To remove the front wheels: press the tab as shown, and

remove the wheel (fig_b).

TRANSPORT: the stroller can be carried comfortably

locking the front wheels and grasping the main handle

(fig_c).

22 REMOVABLE ITEMS: to remove the hood, take the

elastic off from the buttons on the inside of the

handlebar (fig_a), detach the press studs the sides of

the chassis (fig_b), detach the Velcro strip from the

backrest (fig_c) and remove the attachments of the

hood from their positions on the chassis (fig_d).

23 To remove the seat fabric, press in the holes on the

inside of the chassis (fig_a); remove, from the side of

the seat, the rigid flap of the chassis fabric ((fig_b),

unfasten the elastic of the net from the side buttons

inside the handlebar (fig_c) and unfasten the elastics

from the buttons inside the chassis (fig_d).

24 From the front, remove the lining from the foot

platform (fig_a), remove the leg divider strap from

under the seat (fig_b), unbutton the seat fabric (fig_c),

unscrew the waist belt on the side (fig_d) and remove

the seat fabric from the backrest (fig_e).

GANCIOMATIC SYSTEM

The Ganciomatic System is the quick, practical system

that allows you to fasten the Navetta Pop-Up / Navetta

XL and the Primo Viaggio SL car seat (sold separately)

onto the stroller using the Ganciomatic hooks.

25 GANCIOMATIC HOOKS ON THE STROLLER: to lift the

stroller's Ganciomatic hooks, pull back the fabric at the

corners of the seat.

Pull the frame's side levers outwards (fig_a) and turn

the Ganciomatic hooks upwards.

_ To lower the hooks, proceed in the opposite order.

Primo Viaggio SL can be mounted on the stroller

version of Book Cross / Book 3W with the backrest

attached, or on the Booklet Naked version (i.e. chassis

version).

Navetta Pop-Up / Navetta XL can only be mounted on

the Naked version (i.e. the chassis version).

To transform Book Cross / Book 3W into Booklet

Naked, chassis version, you must:

26 Remove the hood and the seat fabric from the stroller

(up to point C in figure 24); press the buttons under the

seat fabric at the base of the backrest (fig_a) on both

sides. Remove the backrest by lifting it upwards (fig_b).

_ To transform the chassis back into the stroller version,

repeat the operations listed above in the opposite

order.

27 When the stroller is in the Naked version, pull the

frame's side levers outwards (fig_a), rotate the

Ganciomatic hooks upwards, and then rotate the small

levers inwards (fig_b).

GANCIOMATIC FASTENING

28 Book Cross / Book 3W + Primo Viaggio SL

To mount the car seat on the stroller or chassis, you

must:

_ Engage the stroller's brake;

_ Lift the stroller's Ganciomatic hooks;

_ Pull the front bar out to the second position (fig_a).

_ Fully lower the backrest, if in place.

_ Place the car seat, facing mom, on the Ganciomatic

- 18 -

Peg Perego Book 3W Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info