Bedienungsanleitung Peg Perego Book (Seite 22 von 84) (Alle Sprachen)

626122

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

- 22 -

wheels.

To remove the rear wheels: pull the pivot outwards and

remove the wheel as shown in the figure (fig_a).

To remove the front wheels: press the tab as shown, and

remove the wheel (fig_b).

TRANSPORT: the stroller can be carried comfortably

locking the front wheels and grasping the main handle

(fig_c).

29• REMOVING THE LINING: to remove the stroller's lining:

- unthread the belt's leg divider from under the seat

(fig_a);

- slip the elastics off their hooks on both sides (fig_b);

30• - unscrew the belt on both sides, keeping your finger

under the bolt (fig_c);

- unfasten the lining from the armrests as shown in the

picture (fig_d);

- unfasten the soft cover from the seat (fig_e);

31• - on the back of the pushchair:

- remove the lining from the seat (fig_f);

- Unbutton the cover from both sides (fig_g);

- undo the buttons on both sides on the backrest (fig_h);

32• Unfasten and remove the shoulder straps from the

backrest as shown in the figure 18_a / 18_b;

- push in the openings and pull off the side lining.

Do this on both sides (fig_i);

- remove the lining from above (fig_l).

REPLACING THE LINING: to put the lining back on:

- fit the lining onto the backrest

- fit the lining over the platform

- attach the side elastics (26b)

- fasten the lining's hooks to the armrests (27d)

- fasten the lining's buttons to the chassis (27e)

- fasten the belt in the right position with the screwdriver

(27c)

- attach the leg divider under the seat. One part must be

above the seat and one below (26a)

- attach the belt at the desired height (point 18)

33• on the back of the stroller:

- insert the two rigid flaps between the tube and the seat

(fig_a);

- Button the cover back on, on both sides (Fig.b)

34• Button the lining onto the stroller's backrest (fig_c).

Insert the rigid strap into its grooves until it clicks into

place. Check it is securely fastened by pulling it (fig_d).

GANCIOMATIC SYSTEM

The Ganciomatic System is the quick practical system

that enables you to attach the Primo Viaggio (0+ group)

car seat to the stroller in just one step.

35• Before attaching the car seat, you must:

- insert the stroller's break;

- put the backrest into the lowest position (flat, fig_a);

- lift the soft cover as shown in the figure (fig_b);

lift the Ganciomatic attachments from the chassis (fig_c);

- put the car seat in mum-facing position and push it

down until it clicks (fig_d);

- Check that the child transport system is properly

fastened.

- Lift the stroller backrest to the highest position.

- Important: do not remove the bumper bar from the

stroller when you attach the car seat (read point 21 to

see how to attach the bumper bar).

- To release the car seat, read the car seat's instruction

manual.

36• To lower the stroller's Ganciomatic fittings, move them

inwards and rotate them downwards.

SERIAL NUMBERS

37• The information on the BOOK stroller is under the seat

and includes: product name, production date and item

serial number.

This information is required if complaints are made.

ACCESSORIES

38• RAIN CANOPY: can be fastened to the hood (fig_a).

MOSQUITO NETTING: can be fastened to the hood (fig_b).

UMBRELLA: practical umbrella to match (fig_c).

39• BAG: diaper-changing bag with pad for changing baby’s

diaper (fig_a).

CUP HOLDER: may be attached to the mushroom

button on the frame of the stroller (Fig. b).

VARIO FOOT MUFF: a warm, light and soft multi-

purpose foot muff. Can be used as a changing mat

and adjusted to 3 sizes (fig_c).

BABY CUSHION: for Peg Perego high chairs and

strollers. Winter side made with cozy matelassé jersey

and summer side made with 100% cotton (fig_d).

CLEANING AND MAINTENANCE

PRODUCT MAINTENANCE: protect from the weather:

water, rain, or snow; prolonged and continuous

exposure to bright sunlight may give rise to colour

changes of various different materials; store this product

in a dry place.The maintenance have to be regularly.

CLEANING THE CHASSIS: periodically clean all plastic parts

with a damp cloth. Do not use solvent or similar cleaning

products; keep all metal parts dry to prevent rusting; keep

moving parts clean (adjustment mechanisms, locking

mechanisms, wheels, ...) and free of dust and sand and, if

necessary, lubricate with light machine oil.

CLEANING THE RAIN CANOPY: wash with a sponge and

soapy water; do not use detergents.

CLEANING FABRIC PARTS: brush fabric parts to remove

dust and wash by hand at a maximum temperature of

30°C; do not wring; do not use chlorine bleach, do not

iron; do not dry clean; do not apply solvent-based stain

removers and do not dry in a tumble dryer.

PEG-PÉREGO S.p.A.

Peg-Pérego S.p.A. is an ISO 9001

certified company. This certification is

a guarantee for customers and

consumers of the transparency and

trustworthiness of the company's

procedures and working methods. Peg

Pérego can make changes at any time to the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Peg Perego Book Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info