Bedienungsanleitung Peg Perego Elite - carrycot (Seite 14 von 92) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch, Finnisch)

769174

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

• Do not add or use mattresses

different from the original one.

COMBINED WITH CHASSIS:

• This product is compatible with

the following original Peg-Pérego

products: Carrello Book, Scout,

Classico, Team, Duette Piroet.

• WARNING: make sure that all the

attachment devices of the Culla Elite

are correctly fixed before using.

• WARNING: never leave the child

unattended.

COMBINED WITH STAND:

• WARNING: This product is compatible

with the following original Peg-

Pérego products: Home Stand.

• WARNING: Do not use if any part

of the stand is broken, torn or

missing.

• WARNING: Do not let other children

play unattended near the carry cot

and stand.

The images referring to the textile details may

differ from the collection purchased.

For more information, consult our website:

www.pegperego.com.

Instructions for use

Using the Culla Elite

1 HOOD: to lift the hood completely, pull it until it clicks.

2 To lower the hood, press down on the upper part of same

and, at the same time, lower it.

3 The hood comes with a mesh insert so that the baby can

be seen from any position. Pull the zippers as shown in the

picture and pull the hood further, to reveal the mesh insert.

4 FOOT MUFF: to secure it correctly:

Unfasten the hood button.

Position the foot muff in the bassinet.

5 Button the foot muff following the sequence as illustrated.

The foot muff in the figure is properly attached.

6 Fasten the velcro straps as illustrated.

7 The velcro straps can be used to fasten the foot muff to

the hood, so as to protect the child even more against the

elements. Unfasten the sides of the foot muff (arrow_a),

unfold it upwards (arrow_b) and fasten it to the hood with

the velcro straps (arrow_c);

8 CARRY HANDLE: this is built into the hood. To carry the

bassinet, lift the hood (if lowered) until it clicks and hold

the handle placed above it.

• Before lifting the bassinet, ensure the built-in hood is

correctly fastened.

• Before lifting the bassinet, make sure the hood is in the

correct position for transport.

• Before unfastening and lifting the bassinet from the frame,

adjust the backrest to its lowest position (figure 11).

9 ROCKING POSITION: The base of the Culla Elite has a special

shape which allows you to rock the child when it is placed

on a flat surface.

10 COT POSITION: It is possible to make the Culla Elite into a non-

rocking cot by opening out the two legs under the base.

11 ADJUSTING THE BACKREST and THE FOOTREST: with the

COMFORT SYSTEM, backrest and footrest can be adjusted

simultaneously. Pull the knob outwards (fig_a) while turning

it (fig_b) to raise or lower the backrest and the footrest.

12 FOUR SEASONS SYSTEM: as shown in the figure, it is

possible to adjust the product’s air circulation from the

base in order to prevent condensation.

To create a cool, well ventilated environment (in summer),

open the holes by moving the 4 levers outwards. To limit

the entry of air (in winter), move the levers inwards.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Peg Perego Elite - carrycot Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info