the hood.
32 •Insert the three pieces of the false motor.
• The false motor is an additional toy for children
who can enjoy themselves putting it together like
a puzzle.
33 •Position the windshield by inserting the three
tabs into the front of the dashboard.
34 •Secure the windshield with the two screws
supplied (one per side).
35 •Join the two parts of the steering wheel (steering
wheel and underlying sleeve) matching the two
pieces.
36 •Assembling the horn:
1- insert the spring;
2- remove the plastic tab from the sound
module. The sound module comes with 3 RL44
batteries and is ready to use.
3- insert the sound module so that the side with
the hole is facing downwards.
37 •Align the notches of the horn cover with the
sleeve and snap fit them onto the steering wheel.
38 •Assemble the steering wheel keeping the shaft
still with the other hand. Make sure the holes in
the steering wheel are aligned with those of the
steering shaft.
39 •Insert the nut in the hexagonal hole of the
steering wheel and the screw in the circular hole.
Tighten until possible.
40 •Connect the battery plug to the plug of the
electrical system.
41 •Position the seat inserting the back of the back
rest into the hole of the bodywork, as shown in
the figure (1). Rotate the seat into position (2).
42 •Secure the seat by rotating the pin with the help
of a tool or a coin.
A: saddle open
B: saddle closed.
• Stick on the remaining stickers as numbered.
• The vehicle is ready to use. Place both hands on
the steering wheel and press the accelerator
pedal with your foot.
VEHICLE FEATURES AND
INSTRUCTIONS FOR USE
43 •CABIN:
A: glove compartment
B: horn with real Fiat 500 sounds
C: Gear lever (2 speeds + reverse)
D: Electric accelerator/brake pedal Lifting the foot
off the pedal automatically activates the break.
44 •MOTOR COMPARTMENT: if the false motor is
removed, this compartment can be used for
storage.
45 •GEAR LEVER: keeping the gear lever pushed
forward as you press on the accelerator pedal
makes the vehicle reverse. Warning: the left hand
must always be on the steering wheel to avoid
collisions. By leaving the gear lever in position 1,
the vehicle travels at the lowest speed. By pulling
the lever backwards, the vehicle travels at the
highest speed.
• NOTE: as soon as it is removed from the
packaging, the vehicle will only travel at the first
speed (1) and in reverse (R). In order to use the
second speed (2), you have to unlock the safety
lock on the lever (see the procedure in the
following figures).
46 •Unscrew the safety lock.
47 •Turn the safety lock as shown, and tighten the
screw in the new position.
48 •The second speed is now unlocked. Pull the lever
back to position 2. Place both hands on the
steering wheel and press the accelerator pedal.
REPLACEMENT OF LR44 BATTERIES
49 •The horn works with 3 button cell LR44
batteries in the sound module. To replace them,
unlock the sleeve and the horn cover by pushing
the fastening tabs from under the steering wheel.
50 •Extract the sound module and loosen the screw
of the cover of the battery compartment.
51 •Remove the flat batteries and replace them with
new batteries of the same kind. Ensure polarity is
right. Re-assemble all the parts.
REPLACING THE BATTERY
PLEASE NOTE: THE PICTURES OF THE BATTERIES
ARE FOR ILLUSTRATIVE PURPOSES ONLY. YOUR
BATTERY MAY BE DIFFERENT FROM THE MODEL
SHOWN. THIS DOES NOT AFFECT THE
REPLACEMENT AND CHARGING PROCEDURES
DESCRIBED.
52 •Rotate the fixing lock of the seat. Remove the
seat. Loosen the screws of the battery holder.
Disconnect the battery plug from the plug of the
electrical system. Remove the flat battery.
53 •Insert the charged battery or a new, original
12V/4.5Ah or 12V/8Ah battery into the
compartment. Put the battery holder back into
place. Tighten the screws. Reconnect the plugs.
Put the seat back into place. Fasten the seat by
rotating the pin to the locking position.
CHARGING THE BATTERY
WARNING: BATTERY CHARGING AND ANY
OTHER WORK ON THE ELECTRICAL SYSTEM
MUST BE CARRIED OUT BY ADULTS.
THE BATTERY CAN ALSO BE CHARGED
WITHOUT REMOVING IT FROM THE TOY.
54 •Disconnect plug A of the electrical system from
plug B of the battery by pressing on the side.
55 •Put the plug of the battery charger into an
electricity socket in the house following the
annexed instructions. Connect plug B with plug
C of the battery charger.
56 •Once charging is complete, unplug the charger
from the wall outlet, then unplug terminal C
from terminal B.
57 •Insert plug B right into plug A until it snaps into
place. When you have finished, always remember
to fasten the seat by rotating the pivot into the
locking position.
Lisez attentivement ce manuel d’instructions pour
vous familiariser avec le modèle et apprendre à votre
enfant à le conduire de façon correcte, amusante et
en toute sécurité. Conserver ensuite ce manuel pour
pouvoir vous y référer à l’avenir.
Avant d’utiliser le véhicule pour la première fois,
mettez en charge la batterie pendant 18 heures.
Ne pas appliquer cette règle pourrait être à l’origine
de dommages irréversibles à la batterie.
• Âge 3+
• Véhicule à 1 place
• 1 Batterie rechargeable de 12 V 4,5 Ah scellée au plomb
• 2 roues motrices
• 2 moteurs de 165 W
• Vitesse en première 3,1 km/h
• Vitesse en seconde 6,3 km/h
• Vitesse en marche arrière 3,1 km/h
Peg Perego se réserve le droit d’apporter, à tout
moment, des modifications aux modèles et aux
données figurant dans ce livret, pour des raisons de
caractère technique ou de management.
PEG PEREGO® vous remercie d’avoir choisi ce
produit. Depuis plus de 60 ans, PEG PEREGO
accompagne les promenades des enfants. Dès leur
naissance, avec les landaus puis avec les poussettes et
plus tard, avec les jouets à pédales et à batterie.
Découvrez sur notre site la gamme complète des
produits, les nouveautés et d’autres renseignements
sur le monde Peg Perego.
www.pegperego.com
DENOMINATION DU PRODUIT
Fiat 500 12 Volt
CODE D’IDENTIFICATION DU PRODUIT
IGOR0065
REFERENCES NORMATIVES (origine)
Directive générale Sécurité des Jouets 2009/48/EC
Standard EN 71 / 1 -2 -3
Standard EN62115
Directive Compatibilité électromagnétique (CEM)
2004/108/CE
Standard EN55022 - EN55014 - EN61000
Directive européenne RAEE 2003/108/CE
Directive européenne RoHS 2011/65/EU
Directive Ftalati 2005/84/CE
Ce produit n’est pas conforme aux normes de
circulation routière et, par conséquent, ne doit pas
circuler sur les voies publiques.
DECLARATION DE CONFORMITE
Peg Perego S.p.A. déclare sous son entière
responsabilité que l’article ci-dessus référencé a
été soumis à des essais internes et a été
homologué auprès de laboratoires externes et
indépendants, conformément aux normes en
vigueur.
DATE ET LIEU DE DELIVRANCE
Italie - 10. 06. 2013
Peg Perego S.p.A.
via A. De Gasperi, 50
20862 Arcore (MB) - ITALIA
FRANÇAIS
DECLARATION DE CONFORMITE
RECOMMANDATIONS IMPORTANTES
