Bedienungsanleitung Peg Perego Futura (Seite 11 von 60) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Finnisch)

769181

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

- 11 -

_ WARNING To avoid injury

ensure that the child is kept

away when unfolding and

folding this product.

_ WARNING Do not let the child

play with this product. This

product is not a toy.

_ WARNING The assembly and

preparation of the product must be

carried out by an adult.

_ Do not use this product if there are

parts missing or signs of breakage.

_ WARNING Never leave the child

unattended.

_ Always apply the brake when

stationary and when loading or

unloading children.

_ Do not insert fingers into the

mechanisms.

_ Be careful not to hurt the child

when adjusting the mechanisms

(handlebar, backrest … ).

_ Any load applied to the handle and/

or the backrest and/or laterally to

the product can compromise the

stability of the product.

_ Do not load the baskets over 7

Kg. Do not put weight in the cup

holder (if present) in excess of

those indicated on the cup holders

themselves and never hot drinks. Do

not put loads of more than 0.2 Kg in

the hood pockets (if present).

_ Do not use the product near to

stairs or steps, heat sources, naked

flames or dangerous objects within

reach of the child.

_ Only replacement parts supplied or

recommended by the manufacturer/

distributor shall be used.

_ WARNING This product is not

suitable for running or skating.

WARNING Do not add any mattress

are not approved by the manufacturer.

_ Do not use accessories which are

not approved by the manufacturer.

The images referring to the textile details may

differ from the collection purchased.

For more information, consult our website:

www.pegperego.com

INSTRUCTIONS

OPENING: Before opening the frame, remove (without

using blades) any die-cut cardboard.

WARNING:

_ DO NOT PULL OR FORCE THE FASTENER BEYOND ITS

LIMIT.

_ DO NOT USE THE FASTENER AS A CARRY HANDLE OR

TO CARRY WEIGHTS.

DO NOT HANG BAGS OR OTHER ACCESSORIES TO THIS

FEATURE.

Press down the side fastener, hold the upper section of

the handle and rotate it towards you until the frame is fully

opened (fig_a). Open frame (fig_b).

The frame is properly opened when the attachment on the

base clicks into place, as shown.

WARNING: When placing the seat on the frame, press the

seat downwards to ensure it engages securely onto the base.

2 FITTING THE WHEELS: Slot the uprights into the rear

wheel crosspiece (fig_a), ensuring that it is facing the

right way, then push the rear wheels on and make

sure that they click into place (fig_b).

To mount the

front wheels, fit them into the uprights until they lock into

place (fig_c).

3 ATTACHING THE MAIN HANDLE: if the handle tube

faces upwards, align it with the stroller (Fig_a).

Fasten the handle to the frame as shown in the figure

(Fig_b).

To complete the operation, press the two side buttons

on the handle (Fig_c) to ensure the handle pushes in

all the way, until it clicks into place (Fig_d).

4 Fasten the basket eyelets to the buttons on each side

of the frame (fig_1).

To complete the basket attachment procedure for the

front part, you are required to insert the supplied tie

(fig_2) as follows:

position it between the basket and buttons, as shown

(fig_3) and use your finger to push downwards, so as

to complete the attachment procedure (fig_(fig_4).

Repeat the same procedure for the other side of the

basket.

5 Attaching the rear part of the basket.

Fasten the upper basket eyelet to the button on each

side of the frame (Fig_5).

Fasten the basket’s two lower eyelets to the two

buttons on the rear bar of the frame (Fig_6).

WARNING: If you do not hook the basket on

correctly, as shown, the basket will be unable to

support the weight of loads placed in it.

6 FIXED OR SWIVELING FRONT WHEELS: Lift the levers

to prevent the wheels from swiveling (fig_a) and

lower them to allow the wheels to swivel (fig_b). On

uneven surfaces, the wheels should be set to their

fixed position.

7 BRAKE: Press the lever down to apply the brake on the

chassis and lift it to release the brake.

8 ADJUSTABLE HANDLEBAR: To adjust the height of the

handlebar, press both of the side buttons at the same

time (fig_a) and swing it into the desired position

(fig_b), then release the buttons.

9 FOLDING UP: The chassis can be folded up without the

seat, with the seat facing the person pushing (recline

the backrest before folding it) or with the seat facing

forward. To fold the stroller, it is best to set the front

wheels to their fixed position and close the hood (if

fitted). Place the handle as shown in the figure (fig_a).

Pull the inside handle on the base (fig_b) and lift it (fig_c);

the handle will drop forward until the frame is closed.

10 To ensure the frame is closed properly, check that

the side fastener is enabled (fig_a). When closed, the

frame remains in the upright position (fig_b).

For greater compactness, it is possible to remove the wheels.

To remove the rear wheels: pull outwards on the lever

located under the rear bar and remove the wheels as

shown in figure (fig_a).

To remove the front wheels: press the tab as shown, and

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Peg Perego Futura Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info