Bedienungsanleitung Peg Perego Isofix-Base 0-1K (Seite 9 von 64) (Alle Sprachen)

626177

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

EN_English

Thank you for choosing a

Peg-Pérego product.

Product compatibility

• "Isofix Base 0+1 K" may be used exclusively

with any models of the car seats "Primo

Viaggio Tri-Fix", "Primo Viaggio SL" and

"Viaggio1 Duo-Fix".

• Do not use the Isofix Base 0+1 K with the

car seats "Primo Viaggio" or "Primo Viaggio

SIP".

Product characteristics

• “Isofix Base 0+1 K” must be fitted on

vehicle seats facing in the normal direction

of travel. Do not fit “Isofix Base 0+1 K” on

seats with airbags or on seats that face

away or sideways with respect to the

normal direction of travel of the vehicle.

• The use of “Isofix Base 0+1 K”ensures greater

safety and ease of mounting for Peg Perego

child car seats.

• Ensure that the vehicle is fitted with an Isofix

system. Check the list of car models provided

with the product.

WARNING

• Read the instructions carefully before use

and keep them in the holder provided for

future reference. Failure to closely follow

the installation instructions for the car

safety seat will put your child at risk.

• The assembly and installation operations must

be conducted by adults.

• Avoid inserting fingers into the mechanisms.

• Death or serious injury can result if this safety

seat base is installed on seats with airbags.

• Eliminate danger by disabling airbags

surrounding the position of the car safety seat.

• When travelling take special care to make sure

that luggage or other objects do not injure the

child in the safety seat in the case of accidents.

• Do not use installation methods different from

those indicated. This would result in the risk of

detachment from the seat.

• Child car seat base, group 0+, “Semi-Universal”

category, class E for use with any models of

the car seats "Primo Viaggio Tri-Fix", "Primo

Viaggio SL" . Approved under European

standard ECE R44/04 for children weighing

from 0 to 13 kg (0 to 12/14 months). Only for

use in vehicles fitted with Isofix approved

points (for details see the list of car models

fitted with Isofix attachment systems).

• Child car seat base, group 1, “Semi-Universal”

category, class A for use with Viaggio1 Duo-Fix

and all its models. Approved under European

standard ECE R44/04 for children weighing

from 9 to 18 kg (from 9 months to 4 years

approx). It can only be used in vehicles with

approved Isofix points.

• Check the vehicle's use and maintenance

manual to see whether it is compatible with

Isofix child restraint systems.

• If you are unsure of anything, contact the

manufacturer or the retailer of this child car

seat.

• Do not remove the stickers; this could mean

that the product no longer conforms with

standards.

• Do not use this base if it is broken or has

missing parts, if it is second-hand or of

uncertain origin, or if it has undergone violent

strain in an accident, as it may have suffered

extremely dangerous structural damage.

• Do not modify the product.

• For any repairs, replacement parts or

information on the product, contact the

post-sales assistance service. The relevant

information is provided on the last page of this

manual.

• Do not use this base after a period of 7 years

has passed from the date of production

indicated on the bottom. The natural ageing

of the materials may mean that it is no longer

compliant with standards.

Instructions for use in car

1• Find the Isofix attachment points on the car

seats.

2• Lengthen the Isofix attachments on the base

by pressing the lever as shown in the figure, to

facilitate fastening.

3• Extract the support leg from under the base

and fold it outwards until it clicks into position.

Position the base on the car seat as shown in

the figure, aligned with the Isofix attachments.

4• Engage the attachments on the base to the

seat buckles (check that there is nothing

interfering with the seat buckles that could

stop them from functioning properly).

• IMPORTANT: The two signals on the sides

of the handle go from red to green to indicate

that it is properly attached.

• IMPORTANT: Once the procedure is

complete, move the base to check that both

Isofix points are actually attached.

5• Adjust the height of the support leg by

pressing down the inner catch until it touches

the car floor (it is important for the leg to be

well supported on the car floor even if this

causes the base to be slightly raised from the

vehicle seat).

• Once the above steps are complete, “Isofix

Base 0+1 K” can remain in the car ready for

use.

• If your car has storage compartments on the

floor of the vehicle, in the area where the support

leg is to rest, you should open the compartment

and rest the leg on the bottom of it.

Connecting Primo Viaggio Tri-

Fix / Primo Viaggio SL

6• Place the child in the car seat safety seat,

remembering to secure him/her with the

harness. Lift the chair with the handle (facing

the opposite direction to normal vehicle

movement) and engage to the base by

pressing down with both hands on the chair

until it clicks into place.

• IMPORTANT: The two signals behind the

base go from red to green to indicate that the

child car seat is properly attached.

• IMPORTANT: Once the procedure is

complete, move the child car seat to check

that it is actually attached.

7• Inside the car, the handle must be fully

lowered towards the backrest of the vehicle

seat, as shown in the figure. Press the round

buttons on the handle and at the same time

rotate the handle as shown in the figure until it

clicks into position.

8• Pull the handle on the base and push the base

Peg Perego Isofix-Base 0-1K Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info