Bedienungsanleitung Peg Perego Si Switch (Seite 16 von 68) (Alle Sprachen)

626320

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

- 16 -

_ Do not load the baskets over 5Kg. Do not put weight

in the cup holder (if present) in excess of those

indicated on the cup holders themselves and never

hot drinks. Do not put loads of more than 0.2 Kg in

the hood pockets (if present).

_ Do not use the product near to stairs or steps, heat

sources, naked flames or dangerous objects within

reach of the child.

_ Only replacement parts supplied or recommended by

the manufacturer/distributor shall be used.

_ WARNING Don't use the rain cover (if present)

on a product without a hood or parasol that can

hold it. Always use the rain cover only under adult

supervision. Don't use the rain cover indoors and

check to ensure the child is not to warm; do not

park the vehicle close to heat sources and keep well

away from the lighted cigarettes. Ensure that the rain

cover is not interfering with any moving parts of the

carriage/stroller. Always remove the rain cover before

folding your carriage/stroller.

_ WARNING This product is not suitable for running or

skating.

_ Always apply the brake when loading or unloading

children.

_ WARNING Do not add any mattress.

PRODUCT PARTS

Check the package contents and contact our Customer

Service for any claim.

_ The Si Switch COMPLETO stroller includes: 2 swiveling

or locking front wheels, 2 rear wheels, a basket, a hood,

a foot muff, a front bar, and a rain canopy.

_ The Si Switch CLASSICO stroller includes: 2 swiveling

or locking front wheels, 2 rear wheels, a basket, a hood,

a front bar.

INSTRUCTIONS

1• OPENING THE STROLLER: lift the side levers on the

handles simultaneously (fig_a) and pull upwards until

the stroller opens. To ensure it has opened properly,

check that the side tubes are fastened together (fig_b).

2• If the hooks are not secured properly, press the seat

downwards (fig_c) until they click into place. Finally,

press downwards with your foot (fig_d).

3• Place the front bar into the position of use by lifting it

upwards until it locks into place (fig_e).

4• BASKET: to mount the basket, slip the loops over the

rear hooks A and B and the front hooks C and D.

5• BRAKE: To set the brake on the stroller, lower the lever

on the rear wheel unit with your foot. To release the

brake, lift the lever (fig_a). When stationary, always

apply the brake.

SWIVEL WHEELS: to make the front wheels swivel,

lower the lever (arrow 1). To lock them, push the lever

in the opposite direction (arrow 2). The rear wheels are

fixed (fig_b).

6• FRONT BAR: It can be put in 2 positions:

POSITION 1: Use.

POSITION 2: Folding.

To adjust it, press the two side buttons at the same time.

7• The front bar can only be opened on one side, to make

it easier for the child to get in and out of the stroller

when he or she is bigger. To open the front bar, press

the button under the armrest and at the same time

pull the front bar outwards (fig_a). To remove the front

bar, press the two buttons under the armrests and at

the same time pull the front bar outwards (fig_b).

To attach the front bar, insert the two ends into the

armrests until they lock into place (fig_c).

8• HOOD: Open the zipper to extend the hood and

protect your child from the sun even with the stroller's

backrest fully reclined (fig_a).

Lifting the cloth flap reveals a mesh insert that allows

you to see the child while asleep and promotes better

ventilation (fig_b).

To release the hood, unfasten the attachments on the

two sides of the seat (fig_c)

The hood includes a slot from which you can hang

your child's favorite toy (fig_d).

9• FOOT MUFF Si Switch COMPLETO: to fasten it

correctly, slip the foot muff under the footrest and leg

rest and place it over the seat, keeping the front bar on

the outside. Fasten the FIRST button of the foot muff

to the inside of the stroller (fig_a) and hook the frog

fastenings, also to the front bar (fig_b).

On lowering the stroller's backrest, it is possible to

place the foot muff higher up and cover the child

better. To do this, fasten the SECOND button of the

foot muff to the inside of the stroller (fig_c) and hook

the frog fastenings to the highest loops (fig_d).

10• RAIN CANOPY Si Switch COMPLETO: to add the rain

canopy, place it on the stroller, fasten it at the sides to

the inside of the frame (fig_1), and fasten the elastics

after pulling them round the lower part of the stroller

frame (fig_2).

11• 5-POINT SAFETY HARNESS: to fasten, insert the two

buckles of the waist strap (with attached shoulder

straps, arrow a) into the leg divider strap until they

click into place (arrow b). To unfasten them, press the

button which is situated in the centre of the fastener

(arrow c) and pull the waist strap outwards (arrow d).

12• To tighten the waist strap, pull on both sides in the

direction of the arrows; to loosen it, do the opposite.

13• It is possible to set the safety harness at 3 different

heights, depending on how tall the child is. As the

child gets bigger, the harness must be moved to a

higher position.

14• To adjust the height of the safety harnesses, release

the two buckles on the rear of the backrest.

Pull the shoulder straps towards you (arrow a) until the

buckles are released and insert them in the backrest

loops (arrow b). Remove the shoulder straps from the

sack (arrow c) and insert them in the most appropriate

buckle (arrow d), then reattach the two buckles

behind the backrest (arrow e). The buckles are securely

attached when a click is heard (fig f).

15•

ADJUSTING THE LEG REST: The leg rest can be adjusted

in 2 positions. To lower it, pull the two side levers

downwards and at the same time lower the leg rest. To

raise it, push the leg rest upwards until it locks into place.

ADJUSTING THE BACKREST: The backrest reclines into

various positions. To lower the backrest, lift the handle

and simultaneously lower the backrest, locking it in

desired position. To raise it, push the backrest upwards.

16• REVERSIBLE SEAT The seat can be attached to the

frame facing either mom (fig_a) or the world (fig_b).

17• RELEASING/FASTENING THE SEAT

To release the seat: press the side buttons

simultaneously and lift the seat, which will have

unfastened, by pressing on the rounded area of the

structure, as shown in the figure (fig_a).

To fasten the seat: place it on the frame with the side

buttons corresponding to the relevant holes; the seat

will click into place (fig_b).

Peg Perego Si Switch Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info