Bedienungsanleitung Peg Perego Si (Seite 14 von 60) (Alle Sprachen)

626319

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

- 14 -

rear of the stroller’s backrest (fig_a).

The hood can be set in 3 different positions (fig_b) by

simply pulling it forwards or backwards.

The section of netting can be pulled out from the hood

to protect the child from the sun (fig_c) and easily

replaced back inside when it is no longer needed.

7• COVER: in order to use the cover correctly (fig. a),

fasten the buttons in the inner part of the stroller (fig.

1) and lay it beneath the seat covering the footrest,

then fasten the buttons (fig. 2).

RAIN CANOPY: To fit the rain canopy, slip it onto the

stroller (fig_b), button it down on the sides of the

hood (fig_1) and attach the elastic loops, taking in the

chassis in the lower part of the stroller (fig_2).

8• 5-POINT SAFETY HARNESS: to fasten, insert the two

buckles of the waist strap (with attached shoulder

straps, arrow a) into the leg divider strap until they

click into place (arrow b). To unfasten them, press the

button which is situated in the centre of the fastener

(arrow c) and pull the waist strap outwards (arrow d).

9• To tighten the waist strap, pull on both sides in the

direction of the arrow (Fig.a). To loosen it do the

opposite. The waist strap can be tightened as far as the

safety lock (Fig_b).

10• It is possible to set the safety harness at 3 different

heights, depending on how tall the child is. As the

child gets bigger, the harness must be moved to a

higher position.

11• To adjust the height of the safety harnesses, release

the two buckles on the rear of the backrest.

Pull the shoulder straps towards you (arrow a) until the

buckles are released and insert them in the backrest

loops (arrow b). Remove the shoulder straps from the

sack (arrow c) and insert them in the most appropriate

buckle (arrow d), then reattach the two buckles

behind the backrest (arrow e). The buckles are securely

attached when a click is heard (fig f).

12• LEG REST ADJUSTMENT: The leg rest can be set in 2

different positions. To lower the leg rest, pull the two

side levers downwards and at the same time lower the

leg rest. To raise the leg rest, push it upwards until it

clicks into position.

BACKREST ADJUSTMENT: The backrest can be set in 3

positions: To lower the backrest, lift the levers on both

sides at the same time and lower it, locking it in the

position required. To lift the backrest, push it upwards.

13• FOLDING UP: Before folding up the stroller, it is best to

lower the front bar to position 2.

The stroller can be folded up using one hand only: pull

first one lever upwards and then the other, until they

click.

14• Hold the central handlebar and pull it upwards until

the stroller folds up (fig_a). Check the correct closure

of the chassis from the safety hook. When folded, the

chassis will stand upright (fig_b).

15• TRANSPORT: The stroller can be moved with ease (with

the front wheels fixed) using the central handle (fig_a).

It can also be carried using the side handle (fig_b).

16• REMOVABLE COVERS: To remove the cover of the stroller:

Release the two buckles on the rear of the backrest

(fig_a).

Release the two buttons on the seat (fig_b).

Pull the buckle of the crotch strap out from

underneath (fig_c).

Release the buttons from the side of the sack (fig_d).

17• Pull the sack off the footrest (fig_e).

To remove the safety harness, release the screws on

both sides, using a screwdriver and pliers to hold the

nut still (fig_f).

Pull the sack upwards (fig_g).

ATTACHING PRIMO VIAGGIO SL

You must first set the brakes on the stroller.

Lock the car seat onto the stroller without the baby.

The car seat must be fastened facing the mother at

all times.

If necessary, take off the stroller hood since it is

already fitted on the car seat.

Position the backrest of the stroller into the 2nd

central position (section 12).

Position the car seat handlebar into transport

position so that the straps can be easily fastened.

18• Push the button beneath the armrest and extend

the front bar, then simultaneously pull it out from

both sides (fig. a).

WARNING: Only extend the front bar when

attaching the Car Seat.

Lean and fit-in the car seat into the seat of the

stroller (fig. b).

19• First lock the strap buttonhole into the button of

the stroller (arrow 1), then pass through the strap

behind the handlebar of the car seat (arrow 2).

Lock the strap buttonhole into the button on the

lower part of the stroller frame (arrow 3) and then

tighten the strap until the car seat is completely

fastened into the stroller (arrow 4).

Follow the same procedures on the other side of

the stroller (fig. c).

Car seat locked correctly into the stroller (fig. d).

Releasing the car seat from the stroller:

loosen the belts;

unlock the strap buttonhole from the lower part

of the stroller frame; slip it off from behind the

handlebar of the car seat; then, unlock the strap

buttonhole from the stroller button.

SERIAL NUMBERS

20• The Stroller Si has all the following relevant

information behind the backrest: product name,

date of manufacture and serial number.

This information is required for any complaints.

ACCESSORIES

21• MOSQUITO NETTING: can be fastened to the hood (fig_a).

BAG: diaper-changing bag with pad for changing baby’s

diaper. Attaches to the stroller (fig_b).

CUP HOLDER: may be attached to the mushroom

button on the frame of the stroller (Fig. c).

22• TRAVEL BAG: practical duffle bag for transporting the

stroller by plane (fig_a).

UMBRELLA: practical umbrella to match (fig_b).

PADDED CUSHION for Peg Perego high chairs and

strollers. Winter side made with cozy matelassé jersey

and summer side made with 100% cotton (fig_c).

Peg Perego Si Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info