Bedienungsanleitung Pegasus 2020 (Seite 47 von 62) (Englisch)

773682

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

MY20P02-2_1.0_13.01.2020 47

Cleaning and servicing

The rims of a rim brake with invisible wear

indicator are worn as soon as the wear

indicator becomes visible in the area of the rim

joint.

The rims with visible wear indicator are worn as

soon as the black, all-round groove on the pad

friction surface is no longer visible. We

recommend that you also replace the rims with

every second brake lining replacement.

4Check the tension of the spokes.

7.4.1.1 Checking the tyres

Check the tyre wear. The tyre is worn if the

anti-puncture protection or the carcass cords

are visible.

A specialist dealer will need to change the tyre

if it is worn.

7.4.1.2 Checking the rims

Check the rims for wear. The rims are worn as

soon as the black, all-round groove on the pad

friction surface becomes invisible.

Contact your specialist dealer to have the rims

replaced. We recommend that you also replace

the rims at the same time as every second

brake lining replacement.

7.4.1.3 Checking and adjusting the tyre

pressure – Dunlop valve

Only applies to bicycles with this equipment

The tyre pressure cannot be measured on the

simple Dunlop valve. The tyre pressure is

therefore measured in the filling hose when

pumping slowly with the bicycle pump.

It is recommendable to use a bicycle pump with a

pressure gauge. The operating instructions for the

bicycle pump must be adhered to.

1Unscrew and remove the valve cap.

2Connect the bicycle pump.

3Pump up the tyre slowly and pay attention to

the tyre pressure in the process.

4Adjust the tyre pressure according to

specifications in the bicycle pass.

5If the tyre pressure is too high, unfasten the

union nut, let air out and re-tighten the union

nut.

6Remove the bicycle pump.

7Screw the valve cap tight.

8Screw the rim nut gently against the rim with

the tips of your fingers.

7.4.1.4 Checking and adjusting the tyre

pressure – presta valve

Only applies to bicycles with this equipment

It is recommendable to use a bicycle pump with a

pressure gauge. The operating instructions for

the bicycle pump must be adhered to.

1Unscrew and remove the valve cap.

2Open the knurled nut around four turns.

3Carefully apply the bicycle pump so that the

valve insert is not bent.

4Pump up the tyre slowly and pay attention to

the tyre pressure in the process.

5Correct the tyre pressure as per the

specifications on the tyre.

6Remove the bicycle pump.

7Tighten the knurled nut with your fingers.

8Screw the valve cap tight.

9Screw the rim nut gently against the rim with

the tips of your fingers.

7.4.1.5 Checking and adjusting the tyre

pressure – Schrader valve

Only applies to bicycles with this equipment

It is recommendable to use a bicycle pump with a

pressure gauge. The operating instructions for

the bicycle pump must be adhered to.

1Unscrew and remove the valve cap.

2Attach the bicycle pump.

3Pump up the tyre slowly and pay attention to

the tyre pressure in the process.

The tyre pressure has been adjusted as per the

specifications.

4Remove the bicycle pump.

5Screw the valve cap tight.

6Screw the rim nut (1) gently against the rim

with the tips of your fingers.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pegasus 2020 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pegasus 2020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info