Bedienungsanleitung Pelgrim GVW 552 (Seite 69 von 85) (Deutsch, Englisch, Holländisch, Französisch)

78020

Zoom out

Zoom in

Vorherige Seite

1/85

Nächste Seite

Setting mode

Press the On/Off button; if ALL programme

indicator lights are off and the End indicator

light is flashing, the appliance is in setting

mode.

Always remember that when performing

the following operations:

– selecting a washing programme,

– setting the water softener level,

– deactivating/activating the audible

signals,

the appliance MUST be in setting mode.

Press the On/Off button; if a programme in-

dicator light is on with a fixed light, the last

performed or selected programme is still set.

In this case, to return to setting mode the

programme has to be cancelled.

To cancel a set programme or a

programme in progress

Press and hold, for about 3 seconds, the

programme selection/cancel button until the

End indicator light is flashing. The pro-

gramme has been cancelled and the appli-

ance is now in setting mode.

Audible signals

Audible signals have been introduced to help

indicate which operations the appliance is

performing:

– end of the washing programme,

– intervention of an alarm due to malfunction

of the appliance.

Factory setting: audible signals activated

It is possible to deactivate the audible

signals.

Deactivation/activation of the audible

signals

1. Press the on/off button. The appliance

must be in setting mode.

2. Press and keep pressed the programme

selection/cancel button until programme

light A flashes and programme light B

comes on with a fixed light.

3. Press programme selection/cancel but-

ton again. The programme light A comes

on with a fixed light and programme light

B starts flashing. Wait until programme

light A goes off. The programme light B

goes on flashing and the end of pro-

gramme indicator light is on with a fixed

light. This indicates that you have activa-

ted the function for deactivating/activat-

ing the audible signals. The fixed light of

the end of programme indicator light

means that the audible signals are acti-

vated.

4. To deactivate the audible signals, press

the programme selection/cancel button

again. The end of programme indicator

light goes off indicating that the audible

signals are deactivated.

5. To memorize the operation, switch off the

appliance by pressing the on/off button.

• To activate again the audible signals sim-

ply follow the above operations until the

end of programme indicator light comes

on.

First use

Before using your dishwasher for the first

time:

• Ensure that the electrical and water con-

nections comply with the installation in-

structions

• Remove all packaging from inside the ap-

pliance

• Set the water softener level

• Pour 1 litre of water into the salt container

and then fill with dishwasher salt

• Fill the rinse aid dispenser

If you want to use combi detergent

tablets such as: '3 in 1', '4 in 1', '5 in

1' etc. follow the instructions given

in 'Use of detergent'.

Set the water softener

The dishwasher is equipped with a water

softener designed to remove minerals and

salts from the water supply, which would

have a detrimental or adverse effect on the

operation of the appliance.

The higher the content of these minerals and

salts, the harder your water is. Water hard-

ness is measured in equivalent scales, Ger-

man degrees (dH°), French degrees (°TH)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pelgrim GVW 552 Seite 69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info