Bedienungsanleitung Pelgrim GVW5820NY (Seite 24 von 76) (Deutsch, Englisch, Holländisch, Französisch)

482589

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Multitab button

Press this button to activate or deactivate

the multitab function. Refer to 'Multitab

function'.

Delay start button

Press this button again and again to delay

the start of the washing programme of 3, 6

or 9 hours. The related indicator comes on.

Function buttons

With these buttons you can:

• Adjust electronically the level of the water

softener. Refer to 'Setting the water soft-

ener'.

• Cancel a washing programme in opera-

tion. Refer to 'Setting and starting a

washing programme'.

• Activate and deactivate the rinse aid dis-

penser (only with the multitab function

on). Refer to ‘What to do if...’.

• Activate and deactivate the acoustic sig-

nals. Refer to 'Acoustic signals'.

Setting mode

The appliance must be in setting mode

for these operations:

• To set and start a washing programme.

• To set and start a delay start.

• To adjust electronically the level of the

water softener.

• To activate or deactivate the rinse aid

dispenser (only with the multitab function

on).

• To deactivate or activate the acoustic

signals.

Activate the appliance. The appliance

is in setting mode when:

• All the programme indicators are on.

Activate the appliance. The appliance

is not in setting mode when:

• Only one programme indicator is on.

• The delay start indicators are on.

– It is necessary to cancel the pro-

gramme or the delay start to go back

to the setting mode. Refer to 'Setting

and starting a washing programme'.

Acoustic signals

You can hear the acoustic signals in these

conditions:

• The washing programme is completed.

• The level of the water softener is adjusted

electronically.

• The appliance has a malfunction.

Factory setting: on.

Deactivating the acoustic signals

1. Activate the appliance. Make sure that

the appliance is in setting mode.

2. Press and hold function button (B) and

function button (C) at the same time un-

til the indicators of function buttons (A),

(B) and (C) flash.

3. Release function button (B) and function

button (C).

4. Press function button (C),

• The indicators of function buttons (A)

and (B) go off.

• The indicator of function button (C)

continues to flash.

• The end indicator comes on.

5. Press function button (C) again.

• The end indicator goes off. The

acoustic signals are deactivated.

6. Deactivate the appliance to confirm.

To activate the acoustic signals again, do

steps (1) through (4). Press function button

(C), the end indicator comes on and the

acoustic signals are active.

Use of the appliance

1. Be sure that the set level of the water

softener agrees with the water hardness

in your area. If not, adjust the water

softener.

2. Fill the salt container with dishwasher

salt.

3. Fill the rinse aid dispenser with rinse aid.

4. Load cutlery and dishes into the appli-

ance.

5. Set the correct washing programme for

the type of load and soil.

6. Fill the detergent dispenser with the cor-

rect quantity of detergent.

7. Start the washing programme.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pelgrim GVW5820NY Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info