Bedienungsanleitung Pelgrim GVW910L (Seite 18 von 24) (Englisch)

692125

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

ActionPossible causesProblem

Check that the dishes are not blocking the spray

arms.

The spray arms do not rotate.The dishes are not clean.

Clean the spray arms. See the chapter Care and

cleaning.

Spray arm holes or bearings blocked.

Choose a longer programme.Unsuitable dishwashing programme.

Dose according to water hardness. Far too much

or far too little detergent results in poorer

dishwashing results.

Incorrect detergent dosage.

Avoid large packages.Old detergent. Detergent is a perishable product.

Do not cover porcelain with large bowls or the

like. Avoid placing very tall glasses in the corners

of the baskets.

Dishes loaded incorrectly.

Place dishes to sit steady.Glasses and cups have toppled over during the

programme.

Check that the filter handle is locked in the stop

position. The handle should point straight out

from the dishwasher.

The filters are not fitted correctly.

Rinse off these types of foodstuffs if not starting

the dishwasher immediately. Use the Rinse and

hold programme.

Some foodstuffs, such as mustard, mayonnaise,

lemon, vinegar, salt and dressings, can mark

stainless steel if left for too long.

Spots on stainless steel or silver.

In order to avoid marks and tarnishing, separate

dishes made from different metals, such as silver,

stainless steel and aluminium.

All stainless steel can cause spots on silver if

they come into contact during dishwashing.

Aluminium can also cause spots on dishes.

See the chapter Settings.Incorrect rinse aid dosage setting.Spots or films on the dishes.

Switch all-in-one detergents or deactivate the

setting TAB and top up with salt and separate

rinse aid. See Rinse aid in the chapter Settings.

The setting TAB is activated and all-in-one

detergent with insufficient drying effect is being

used.

Top up with salt. See the chapter Before washing

for the first time.

Salt compartment empty.

See Water hardness in the chapter Settings.Incorrect water softener setting.

Check that the salt compartment lid is properly

tightened. Otherwise call the service department.

The water softener is leaking salt.

Wash crystal at a low temperature and with a

conservative amount of detergent. Contact the

detergent manufacturer.

Too high temperature and/or too much detergent

can cause etching on crystal. Unfortunately, this

cannot be repaired, only prevented.

Reduce the dosage. See the chapter Settings.

If you have very soft water, you may want to dilute

the rinse aid 50:50 with water.

Rinse aid dosage setting too high.The dishes have a sticky white/blue film.

Use a detergent with a bleaching agent.Lipstick and tea can be difficult to wash off.Spots left after washing.

The detergent compartment must be dry when

adding detergent.

The detergent compartment was damp when

adding detergent.

Detergent residue in the detergent compartment

after dishwashing.

Check that the dishes are not preventing the

detergent compartment from opening.

The detergent compartment has been blocked.

Check that the dishes are placed securely. Spin

the spray arms to make sure they can rotate.

The dishes are not correctly placed or the spray

arms are not rotating.

Rattling sound when dishwashing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pelgrim GVW910L Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pelgrim GVW910L

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info