772113
50
Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
EN 12
Pan recognition
An electronic sensor detects if a pan is present or absent on the
cooking zone. If the type of pan is unsuitable for magnetic induction
cooking or if the pan is too small (see Minimum pan diameter), the
adjacent pan detection symbol is displayed.
If during cooking a pan is removed from the cooking zone without
having first returned the relative knob to “0” position, the power
value, previously set and shown on the relative display, will be
automatically replaced with the symbol.
If the pan is repositioned correctly on the cooking zone, the pan
detection symbol switches Off and cooking will resume normally;
otherwise, after 10 minutes, the symbol will switch Off, the knob
will have to be returned to “0” position and a new power value set
before the cooking zone can be used again.
If a knob is turned to any position before placing a pan on the
cooking zone, the relative display shows the set power value and
then immediately replaces it with the pan detection symbol (the
cooking zone stands by for 10 minutes). If in the meantime a pan is
placed correctly on the cooking zone, cooking will begin; otherwise
the cooking zone does not activate and the pan detection symbol
switches Off. To reactivate the cooking zone, the relative knob must
be returned to “0” position and a new power value set.
Power distribution
The maximum applicable power is distributed among the active
cooking zones.
The first power level set takes priority over the next settings on
the other zones. On activating the last cooking zones, the values
on the displays will start to flash and a double beep will sound,
automatically showing the highest power level supplied.
If the power setting of any of the cooking zones is manually
reduced, the difference in power will be redistributed among the
remaining cooking zones.
Power is distributed automatically among the left cooking zones
and the middle and right cooking zones.
USE
50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Pelgrim IF960 RVS wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info