PENTAGRAM Cerberus [P 6361]
Configuring the router
Basic router settings can be configured using the configuration wizard provided on the CD
supplied with the product. This wizard allows you to configure the WAN connection (ISP
settings) and WLAN connection (wireless network established using the router). More
detailed and advanced configuration settings are available on the router’s configuration
page, which can be accessed using any Web browser.
NOTE: We recommend performing the initial router setup using a computer connected to
the device with a network cable.
Default settings
Before configuring the router, we recommend reviewing the default settings for key router
parameters shown below.
IP address 192.168.0.1
Subnet mask 255. 255. 255.0
SSID PENTAGRAM
DHCP server Enabled
DHCP server address pool 101 IP addresses
from 192.168.0.100
to 192.168.1.200
IP address lease time 86,400 seconds (24 hours)
User name admin
Password admin
We recommend that you change the access password for the router’s configuration page as
soon as possible.
If you ever forget the access password for the router, please reset the device to its default
settings.
Restoring default settings
The router can be restored to its default settings in two ways:
•by clicking the Reset button on the Admin → Backup/Restore Settings tab on the router’s
configuration page; or
•by pressing and holding the RESET button on the back of the device for approx. 10
seconds.
11
