PENTAGRAM Cerberus [P 6367]
Remote WEB Management
This section is to set the IP address and WEB management port of the computer that can
implement remote WEB management.
Enable: Check to enable remote web management.
Port: The management port used by remote WEB management.
WAN IP Address Range: Specify the range of the WAN IP address for remote management.
NOTE:
•
If you want to login the device’s Web-based interface via port 8080, you need to use the
format of WAN IP address: port (for example http://123.123.123.123:8080) to implement
remote login.
•
If your WAN IP address starts and ends with 0.0.0.0, it means all hosts in WAN can
implement remote Web management. If you change the WAN IP address as
123.123.123.122–123.123.123.124 , then only the computer with its IP address at this IP
address range (for example, 123.123.123.122, 123.123.123.123 and 123.123.123.124)
can implement remote Web management.
WAN Ping
The ping test is to check the status of your Internet connection. When this function is enabled,
the router will not respond to Ping request from WAN, but LAN computer can ping pass.
Ignore the Ping from WAN: Check to ignore the ping request and give no reply.
42
