Bedienungsanleitung PENTAGRAM Cerberus ADSL Wi-Fi Lite (Seite 6 von 54) (Englisch)

523352

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

Cerberus ADSL Wi-Fi Lite

Features

• A 4-port 10/100Mbps fast Ethernet switch is built-in with automatic switching between

MDI and MDI-X for 10Base-T and 100Base-TX ports, with auto detection allowing you to

use either straight or cross-over Ethernet cables.

• With built-in 802.11g access point for extending the communication media to WLAN while

providing the WEP and WPA/WPA-TKIP/PSK for securing your wireless networks.

• Network Address Translation (NAT) allows multiple users to access outside resources

such as the Internet simultaneously with one IP address/one Internet access account.

Many application layer gateways (ALG) are supported such as web browser, ICQ, FTP,

Telnet, E-mail, News, Net2phone, Ping, NetMeeting, IP phone and others.

• Universal Plug and Play (UPnP) and UPnP NAT Traversal: This protocol is used to

enable simple and robust connectivity among stand-alone devices and PCs from many

different vendors, and it makes setting up a network simple and affordable. UPnP

architecture leverages TCP/IP and the Web to enable proximity networking in addition to

control and data transfer among networked devices. With this feature enabled, you can

seamlessly connect to Net Meeting or MSN Messenger.

• The Dynamic DNS service allows you to alias a dynamic IP address to a static hostname.

This dynamic IP address is the WAN IP address. To use the service, you must first apply

for an account from a DDNS service such as http://www.dyndns.org.

• The Cerberus ADSL2 Wi-Fi Lite provides an embedded PPPoE client function to

establish a connection. You get greater access speed without changing the operation

concept, while sharing the same ISP account and paying for one access account. No

PPPoE client software is required for the local computer. Automatic Reconnect and

Disconnect Timeout (Idle Timer) functions are also provided.

• Virtual Server: You can specify which services are visible to outside users. The router

detects an incoming service request and forwards it to the specific local computer for

handling. For example, you can assign a PC in a LAN to act as a Web server inside and

expose it to the outside network. Outside users can browse inside the web server directly

while it is protected by NAT. A DMZ host setting is also provided for local computers

exposed to the outside Internet network.

• Dynamic Host Configuration Protocol (DHCP) Client and Server: On a WAN site, the

DHCP client obtains an IP address from the Internet Service Provider (ISP) automatically.

On a LAN site, the DHCP server allocates a range of client IP addresses, including

subnet masks and DNS IP addresses and distributes them to local computers. This

provides an easy way to manage the local IP network.

• Static and RIP1/2 Routing: An easy static routing table or RIP1/2 routing protocol

supports routing capability.

• SNMP (Simple Network Management Protocol): SNMP allows convenient remote

management of the router.

• Web-based GUI: A web-based GUI offers easy configuration and management. User-

friendly and with on-line help, it also supports remote management capability for remote

users to configure and manage this product.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

PENTAGRAM Cerberus ADSL Wi-Fi Lite Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info