523552
9
Zoom out
Zoom in
Vorherige Seite
1/57
Nächste Seite
Cerberus ADSL2+ Lite (P 6311-07)
9
Resetting router
Turn router on and wait for ADSL LED to lit or start blinking.
Press and hold DEFAULT button on the back panel of router for 5-10 seconds and then
release it.
After reset LEDs will return to their normal behavior and all settings will be reset to their
default value. You can login web configurator using default username and password:
admin / trenchip.
Connecting Cerberus to Computer.
You can connect ADSL router with PC through either Ethernet cable or USB cable.
Connecting via Ethernet Port (Ethernet Card)
If there is an available LAN card present on your PC, you just simply connect ADSL router and
PC through the Ethernet cable. Once you establish Internet connection, you could browse the
Web through the Ethernet cable.
Connecting via USB Port
You can connect ADSL router with PC via USB cable when there is no Networking LAN Card
present on your PC. USB cable acts as another LAN connection in this scenario. Once you
establish Internet connection, you could browse the Web through the USB cable.
1. Connect ADSL Router and PC with USB cable.
2. Once “Detect New USB Devicewindow pops out, click Cancel.
3. Insert Driver CD and in menu click Install USB Driver.
4. Click four times Next. If Program Installation window pops up click Continue anyway.
5. Driver will be installed automatically.
6. Click Finish to end installation.
After computer restart should be in ready to work.
To check if USB device is installed properly, click Start Menu Control Panel System
Hardware tab Device Manager.
Configure TCP/IP
This part will help you to configure your computer to communicate with Cerberus router
properly. Computer must be either connected to router via USB port or equipped with network
adapter connected directly to router. You can also connect to Cerberus router via network
hub/switch. Default IP address of the router is 10.0.0.2 and subnet mask is 255.0.0.0. Fastest
and easiest method to configure your computer is to obtain an IP address automatically from
router’s DHCP server.
Make sure that TCP/IP protocol and network adapter are installed on your computer.
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für PENTAGRAM Cerberus P 6311-07 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info