523541
26
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
Cerberus Wi-Fi Lite (P6381-0)
26
WAN Interface Setup
Configure advanced WAN interface settings in the WAN Interface Setup screen. This screen
varies depending on the connection type you select.
The following list describes the new fields in this screen. For other field descriptions, refer to
Setup Wizard: WAN Interface Setup section of this manual.
MTU Size – MTU is the Maximum Transmission Unit. It specifies the largest packet size
permitted for Internet transmission. Keep the default setting, 1452, to have the router select
the best MTU for your Internet connection.
Attain DNS Automatically A DNS (Domain Name System) server keeps mappings of IP
addresses and domain names. Thus you don’t have to enter an IP address to access a web
site/device. If your ISP dynamically assigns DNS information, select this option to obtain DNS
server IP address automatically.
Set DNS Manually Select this option if you have DNS server IP address(es) provided by
your ISP.
DNS 1 .. 3 Enter the IP address of a DNS server in dotted decimal notation. For example,
192.168.1.10.
Clone MAC Address – Some ISPs performs authentication based on a MAC address to allow
only one computer to use the Internet connection. To allow more than one computer to share
an Internet connection, enter a computer’s MAC address to copy to the WAN interface.
Enable UPnP UPnP (Universal Plug and Play) is a communication standard that allows
simple peer-to-peer network connectivity between UPnP-enabled devices. With UPnP, a
device can automatically join a network, obtain an IP address, convey its presence and
manage other UPnP-enabled devices without additional configuration. Select this option to
activate this feature. This allows you to view the Wireless-G Router information and remotely
manage the Wireless-G Router through a UPnP-ready operating system (such as Windows
XP).
Enable IPSec Pass through on VPN Connection IPSec (Internet Protocol Security) is a
standard protocol that allows a device to establish secure connections at the IP layer. Select
this option to allow IPSec tunnels to pass through the Wireless-G Router.
26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für PENTAGRAM Cerberus Wi-Fi Lite P 6381-0 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info