Bedienungsanleitung PENTAGRAM P 6122-20 (Seite 12 von 24) (Englisch)

523570

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

horNET Wi-Fi USB 9dBi (P 6122-20)

• Authentication: WPA PSK and WPA2 PSK

Authentication – Change authentication method.

Encryption – Select the encryption method to be used.

• AES (Advanced Encryption System) uses symmetrical 128-bit data block

encryption.

• TKIP (Temporal Key Integrity Protocol) uses stronger encryption algorithms and

MIC (Message Integrity Check) to provide security against hackers.

WPA Preshared Key – Enter the WPA preshared key (WPA-PSK and WPA2-PSK only).

The key should be 8 to 32 characters in length.

Show Password – Select this box if you do not want key characters to be replaced with

asterisks.

OK – Closes profile configuration and saves settings.

Cancel – Closes profile configuration without saving settings.

Profile configuration – 8021X Tab

Settings on this Tab allow configuring IEEE 802.1x protocol. All information can be obtained

from wireless network administrator. Appearance of this Tab depends on options selected

from EAP Method and Tunnel Authentication lists.

• PEAP – Protect Extensible Authentication Protocol. PEAP transport securely

authentication data by using tunneling between PEAP clients and an authentication

server. PEAP can authenticate wireless LAN clients using only server-side certificates,

thus simplifying the implementation and administration of a secure wireless LAN.

• TLS/Smart Card – Transport Layer Security. Provides for certificate-based and mutual

authentication of the client and the network. It relies on client-side and server-side

certificates to perform authentication and can be used to dynamically generate user-

based and session-based WEP keys to secure subsequent communications between the

WLAN client and the access point.

• TTLS – Tunneled Transport Layer Security. This security method provides for certificate-

based, mutual authentication of the client and network through an encrypted channel.

Unlike EAP-TLS, EAP-TTLS requires only server-side certificates.

• EAP-FAST – Flexible Authentication via Secure Tunneling. It was developed by Cisco.

Instead of using a certificate, mutual authentication is achieved by means of a PAC

(Protected Access Credential) which can be managed dynamically by the authentication

server. The PAC can be provisioned (distributed one time) to the client either manually or

automatically. Manual provisioning is delivery to the client via disk or a secured network

distribution method. Automatic provisioning is an in-band, over the air, distribution. For

tunnel authentication, only support "Generic Token Card" authentication now.

• MD5-Challenge – Message Digest Challenge. Challenge is an EAP authentication type

that provides base-level EAP support. It provides for only one-way authentication - there

is no mutual authentication of wireless client and the network.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

PENTAGRAM P 6122-20 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info