523576
16
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
horNET P 6121-L3 / P 6122-11
Advanced Statistics window
Transmit: Shows information regarding outbound data:
Frames Transmitted OK: Shows the number of frames transmitted without errors.
Frames Retried: Shows the number of frames transmitted again.
Frames Dropped: Shows the number of frames dropped.
No ACK: Shows the number of frames transmitted without acknowledgement.
ACK Frames: Shows the number of frames transmitted with acknowledgement.
RTS Frames: Shows the number of RTS (Request To Send) frames.
CTS Frames: Shows the number of CTS (Clear To Send) frames sent in response to
RTS frames.
No CTS Frames: Shows the number of frames without CTS reply.
Retried RTS Frames: Shows the number of RTS frames transmitted again.
Retried Data Frames: Shows the number of data frames transmitted again.
Receive: Shows information regarding inbound data.
Beacons Received: Shows the number of beacon frames received (to support the
connection).
Frames Received OK: Shows the number of frames received without errors.
Frames Received with Errors: Shows the number of frames received with errors.
CRC Errors: Shows the number of CRC (checksum) errors.
Encryption Errors: Shows the number of encryption errors.
Duplicate Frames: Shows the number of duplicated frames.
AP Mismatches: Shows the number of mismatches related to access points.
Data Rate Mismatches: Shows the number of mismatches related to data rate.
Authentication Time-Out: Shows the number of authentication attempts timed out.
Authentication Rejects: Shows the number of authentication attempts rejected.
Association Time-Out: Shows the number of connection attempts timed out.
Association Rejects: Shows the number of connection attempts rejected.
Standard MIC OK: Shows the number of correct standard MIC (Message Integrity Code)
values.
Standard MIC Errors: Shows the number of incorrect standard MIC (Message Integrity Code)
values.
CKIP MIC OK: Shows the number of correct MIC (Message Integrity Code) values used by
CKIP (Cisco Temporal Key Integrity Protocol).
CKIP MIC Errors: Shows the number of incorrect MIC (Message Integrity Code) values used
by CKIP (Cisco Temporal Key Integrity Protocol).
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für PENTAGRAM P6121-L3 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info