579868
49
Zoom out
Zoom in
Vorherige Seite
1/68
Nächste Seite
48
2
5 Press the setting button (SET) to complete the setting.
6 Set the same channel (CH1 through CH4) of the flash
unit attached to the camera from the function menu.
Refer to “Using the Function Menu” (page 36) for
details on the function menu.
7 Press and hold the function button ( ) to complete
the setting.
The two flash units must be set to the same channel,
otherwise the separated flash unit will not discharge.
3 Set the sync mode of the flash unit attached to the camera
to high-speed sync ( ), and that of the wireless flash
unit to leading curtain sync ( ) by pressing the Sync
button (SYNC) of each flash unit.
4 Set the exposure mode of the camera to manual (M) and
the shutter speed faster than X-sync speed.
If the shutter speed is the same or slower than the X-sync
speed of the camera, the flash will be set to P-TTL, and
when it is faster than X-sync speed, the flash will be set
to high-speed sync mode.
(Photographing)
5 Confirm that both flash units are fully charged, and take the
photograph.
n Slave Flash
If the camera or a flash unit used in combination is not
compatible with wireless function, you can wirelessly take
photographs, using this flash unit separated from the camera
in slave flash mode, without connecting an extension cord.
You can take photographs in manual mode.
• Before photographing in slave flash mode, refer to
“Precautions When Photographing with a Slave Flash”.
(Refer to page 55.)
• Set to SL2 in slave mode of the function menu. (Refer to
page 50.)
1 Turn on the power switch (ON).
2 Set the zoom position (flash coverage angle) to suit the
subject by pressing the zoom button (ZOOM) and place the
flash unit in the desired location.
When setting up the flash unit separately from the
camera, use the off-camera shoe adapter F when using a
tripod, or the off-camera shoe clip CL-10 when setting up
in another location such as tabletop, chair, etc.
3 Turn on the flash unit on the camera.
If the camera’s built-in flash unit is part of the
combination, pop up the built-in flash unit of the camera.
AF360FZ_540FGZ.book Page 48 Friday, December 20, 2013 6:11 PM
49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Pentax AF 360 FGZ II wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Pentax AF 360 FGZ II

Pentax AF 360 FGZ II Bedienungsanleitung - Deutsch - 68 seiten

Pentax AF 360 FGZ II Bedienungsanleitung - Holländisch - 68 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info