Bedienungsanleitung Pentax istD (Seite 2 von 165) (Englisch)

579892

Zoom out

Zoom in

Vorherige Seite

1/165

Nächste Seite

• Misuse of the battery can cause hazards such as leakage, overheating,

explosion, etc. The battery should be inserted correctly with regard to polarity (+

and -) marked on the battery and the camera.

• Battery performance may be temporarily hindered in low temperatures, but will

recover in normal temperatures.

• Keep a spare battery on hand for replacement convenience when shooting

outdoors or while traveling.

• If the built-in flash is used continuously, the battery may become warm, but it

does not mean that the battery is faulty; it is one of the battery's characteristics.

• Replace the batteries at the same time. Do not mix battery brands, type or an old

battery with a new one. It may cause explosion or overheating.

• Always confirm that the camera is working properly when the camera has not

been used for a long time, or before important occasions (weddings, trips, etc.).

PENTAX is not responsible for consequential damages (costs incurred for

photography, lost profits, etc.) arising from failure of this product.

• Do not clean the product with organic solvents such as thinner, alcohol, or benzene.

• Do not subject to high temperatures or high humidity. Do not leave the camera in

a vehicle, as the temperature can get very high.

• Do not store the camera with preservatives and chemicals. Storage in high

temperatures and high humidity can cause molding. Remove from case and

store in a dry and well-ventilated location.

• This camera is not waterproof, and cannot be used in the rain or where the

camera could get wet.

• Do not subject the camera to strong vibrations, shocks, or pressure. Use a cushion

to protect the camera from vibrations of motorcycles, automobiles, or ships.

• The temperature range for camera use is 0°C to 40°C.

• The LCD display may appear black under high temperatures, but will return to

normal as temperatures normalize.

• The LCD display may respond more slowly at low temperatures. This is due to

liquid crystal properties, and is not a fault.

• Periodic inspections are recommended every one to two years to maintain high

performance.

• Sudden temperature changes will cause condensation on the inside and outside

of the camera. Place the camera in your bag or a plastic bag, retrieving the

camera after decreasing the temperature difference.

• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salts. These

could cause a camera breakdown. Wipe dry any rain or water drops on the camera.

• Use a blower or lens brush to remove dust accumulated on the lens or viewfinder.

Never use a spray blower for cleaning as it may damage the lens or viewfinder screen.

• See “Precautions When Using a CF Card” (p.151) for details on the compact

flash memory card (CF Card).

• Please do not press forcefully on the LCD monitor. This could cause breakage or

malfunction.

PRECAUTIONS FOR BATTERY USAGE

Handling the Camera

000

kb321

book

Page

Wednesday

August

2003

12:09

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pentax istD Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pentax istD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info