Bedienungsanleitung Pentax K-1 Mark II (Seite 97 von 140) (Englisch)

708112

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

Sharing

You can perform tethered shooting with the camera connected

to a computer using the optional “IMAGE Transmitter 2”

software. Captured images can be directly saved to the

computer.

1 Set [USB Connection] to [PTP] in the D2 menu.

2 Turn the camera off.

3 Connect the camera to a computer using a USB

cable.

y Connecting the camera to a computer (p.94)

4 Turn the camera on.

5 Start “IMAGE Transmitter 2” on the computer.

“IMAGE Transmitter 2” is started and the computer

recognizes the camera.

u Caution

• When the capture mode selector switch is set to C, tethered

shooting cannot be performed if a memory card is not

inserted in the camera.

t Memo

• For details on “IMAGE Transmitter 2”, download and refer to

the latest version of the “User Guide [Operation]” available at

the following site.

http://www.ricoh-imaging.co.jp/english/support/

download_manual.html

• During tethered shooting, the shutter release always has

priority regardless of the [AF.S Setting] setting of [Phase

Detection AF] and the [Contrast AF Options] setting of

[Contrast Detection AF] in the A1 menu. (p.57, p.59)

This camera has a built-in Wi-Fi™ function. By directly connecting to

a communication device such as a smartphone and tablet via wireless

LAN, the camera can be operated from the communication device and

images can be shared with others via social networks or e-mail.

The Wi-Fi™ function is disabled when the camera is turned on.

Enable the function using one of the following methods.

• Setting from the menus (p.96)

• Setting with the Smart Function (p.96)

When the Wi-Fi™ function is

enabled, the Wi-Fi lamp lights up and

the 7 (white) icon indicating the

wireless LAN status is displayed on

the status screen and Live View

screen. When 8 (gray) is displayed,

a connection with the communication

device is not established correctly.

t Memo

•

Even after the Wi-Fi™ function is enabled, it returns to an inactive

state when the camera is turned off and on again. Also, when the

camera enters

mode, the Wi-Fi™ function is disabled.

• Auto Power Off is not available while a Wi-Fi™ connection is

established or images are being transferred. If Auto Power

Off is activated while a connection is not established, the

Wi-Fi™ function is disabled. The function is enabled when the

camera recovers from Auto Power Off.

• The Wi-Fi™ function is disabled during the USB connection.

u Caution

• Do not attempt to use the Wi-Fi™ function in a location where

the use of wireless LAN devices is restricted or prohibited,

such as on airplanes.

• When using the Wi-Fi™ function, observe local laws and

regulations governing radio communication.

•

If a memory card with a built-in wireless LAN function (such as an

Eye-Fi card or a Flucard) is used, radio wave interference may

occur. When this occurs, disable the Wi-Fi™ function of the camera.

Operating the Camera with a Computer

Using the Camera with a

Communication Device

Enabling the Wi-Fi™ Function

250

1600

5.6

99 999

99999

99 999

99999

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pentax K-1 Mark II Seite 97

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pentax K-1 Mark II

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info