Bedienungsanleitung Perel E305W2-G (Seite 3 von 21) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

621827

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

E305W2 - E305W2-G

V. 01 – 14/07/2015 3 ©Velleman nv

Note

In clock mode, the timer will function according to preset program when the power output displays AUTO ON or

AUTO OFF, if the power output displays ON or OFF, the preset program will not function.

3.3 Clearing the programs

When in program mode, you can clear all the program presets as follows

1. To enter PROGRAM mode, press MENU. Press RCL to clear the programs presets.

3.4 Countdown timer

1. To enter Countdown mode, press MENU twice in clock mode. The hour digit flashes.

2. Press +1 or –1 to set the hour and press OK to confirm. To change the digit more quickly, press and hold

+1 or -1. The minutes digit flashes.

3. Press +1 or –1 to set the minutes and press OK to confirm. The seconds digit flashes.

4. Press +1 or –1 to set the seconds and press OK to confirm.

The countdown starts.

When the countdown stops, the countdown timer returns to 0:00:00. You can set another countdown. To

exit Countdown mode, press MENU.

Cancelling the countdown timer

To enter Countdown mode, press MENU twice in clock mode. The hour digit flashes.

Press RCL to cancel the Countdown mode.

Countdown to turn power off

When the timer is in ON or AUTO ON status, by entering countdown mode, it changes to ON automatically. At

the end of the countdown period, power is turned off.

Countdown to turn power on

When the timer is in OFF or AUTO OFF status, by entering countdown mode, it changes to OFF automatically. At

the end of the preset countdown period, power is turned on.

3.5 Random function

The random function turns appliances on and off at irregular intervals.

• With the timer in Clock mode, press -1 to start random function.

RND is displayed on the LCD indicating timer is in random mode.

• The preset on/off time will be randomly delayed from 4 to 32 minutes.

• To exit the random function, press -1 again. RND disappears from the display.

3.6 Daylight savings time function

• In Clock mode, press RCL to start the daylight savings time function. Press RCL again to stop it.

In this mode, the preset program will be delayed one hour.

• In summer time mode, +1 hour is shown on the display and the time display automatically adds one hour.

3.7 Override function

You can override the program presets in the timer.

Press +1 or -1 to change the timer status. The options are:

• ON: always on

• AUTO ON: timer works according to program presets

• OFF: always off

• AUTO OFF: timer works according to program presets

3.8 Resetting the timer

• To reset the timer, press the RST button with a needle or point. This will reset the time and clear all timer

program settings.

3.9 Connecting an appliance to the timer

When the programs are set:

1. Switch off your electrical appliance.

2. Plug your appliance into the timer socket.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Perel E305W2-G Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info