Bedienungsanleitung PerfectPro AB1 - Audisse (Seite 14 von 82) (Deutsch, Englisch, Holländisch, Französisch)

742515

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

Recalling a preset radiostation

Press the Power button to switch on Perfectpro Audisse.

Select the required operating mode using the Source button.

You can briey press the Preset -/Skip Backward button to recall the previous one

preset station. For example, if you are playing P2, the Preset -/Skip Backward button

will recall the P1 station if it exists.

Note: If the P1 station is not existing in the preset menu, the sound system will directly

search for the previous available station in the list, then play.

Note: If there is no available station in the preset list, the sound system will display a

pop-up screen with an announcement "Preset empty".

or you can briey press the Preset +/Skip Forward button to recall the next one preset

station in the list. For example, if you are playing

P2, the Preset +/Skip Forward button will recall the P3 station if it exists.

Note: If the P3 station is not existing in the preset menu, the sound system will directly

search for the next available station in the list, then play.

Note: If there is no available station in the preset list, the sound system will display a

pop-up screen with an announcement "Preset empty".

Or press and release the Preset button until the display shows the “Recall from Preset”

screen.

Use the Tuning/Seek/Select control to scroll through the preset list until you reach the

preset you want to select. Press and release the Tuning/Seek/Select control to select

the preset.

To nd more FM stations press the Tuning/Seek/Select control to repeat the scan

operation. To scan down in frequency, rotate the Tuning/Seek/Select control in a anti-

clockwise direction rst and then press the control. Your radio will scan down the FM

band from the currently displayed frequency and will stop scanning when it nds a signal

of sufcient strength.

When the end of the waveband is reached Perfectpro Audisse will recommence tuning

from the opposite end of the waveband.

Use the Volume control to adjust the sound level as needed.

PRESETTING RADIOSTATIONS

There are 40 memorypresets. They are used in the same way for each operating mode.

The Perfectpro Audisse has the unique function of Preset + and Preset –

This enables you to quickly zap through your whole preset list.

When performing a Factory Reset the whole Preset memory of the radio will be emptied.

To store radio stations into 40 memory presets by using Preset button.

Press the Power button to switch on Perfectpro Audisse.

Tune to the required radio station as previously described.

To store the station as a preset station, press and hold the Preset button until the

display shows a preset menu 'Save to Preset'.

Rotate the Tuning/Seek/Select control to the desired preset number until it is

highlighted. Press the Tuning/Seek/Select control to conrm and the display shows

‘Preset Stored’. The station will be stored under the chosen preset button. Repeat this

procedure as needed for the remaining presets.

Stations which are already stored in the presets may be over written by following the

above procedure.

Note: The radio station presets are retained in memory when the sound system is

switched off and disconnected from the mains supply.

25 26

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

PerfectPro AB1 - Audisse Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info