Bedienungsanleitung PerfectPro HF2U - Handsfree 2 (Seite 9 von 56) (Deutsch, Englisch, Holländisch, Französisch)

742386

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Scan sensitivity setting – FM

The radio will normally scan all stations from FM broadcasts including the weaker

signals.However,youmaywishtheAuto-scantondonlythosestationswithstrong

enough signals to give good reception.

1. Press the

On/Off button to turn on the radio.

2. Select the FM band by pressing the

Source button.

3. Press the

Menu button, the display shows “Scan setting”.

4. Press the

Tuning knob.

5. Rotate the

Tuning knob

to select between “All stations” or “Strong station” (default

 is“Allstations”).The“Strongstation”optionwillallowtheradiotondstrongsignals

only when scanning.

6. Press the

Tuning knob

toconrmyoursetting.Thedisplaywillreturntonormal

radio display.

PRESET STATIONS

Storing preset stations

There are 20 memory presets in the radio, 10 for DAB and 10 for FM. Presets are

remembered by the radio in the event of a power failure.

1. Press the

On/Off button to turn on the radio.

2. Press the

Source button to select the desired waveband.

3. Tune to the required station.

4. Press and hold the required

Preset button until the radio beeps and shows “Stored”.

5. Repeat step 3 and 4 for the remaining presets.

6. Stations stored in the preset memories can be over-written by following the above

procedure.

Recalling preset stations

1. Press the

On/Off button to turn on the radio.

2. Press the

Source button to select the desired waveband.

3. BrieyPresstherequired

Preset button

. In FM mode the display will show for

example ”P1” on top right hand side.

USING BLUETOOTH

Pairing Bluetooth with your mobile phone

1. Press the

On/Off button to turn on the radio.

2. Select Bluetooth mode by pressing the

Source button.

3. The blue

Bluetooth connected LED

on the front bar will be blinking when the

Handsfree radio is not yet paired with your mobile phone.

4. In your mobile phone open the Setting menu and select Bluetooth, then select

“

Handsfree 2

” in the Bluetooth devices list (Bluetooth pairing instructions may vary

 pertypeofmobilephone,pleasecheckyourmobilephonemanual).

5. When Bluetooth pairing is successful, the

Bluetooth connected LED

will stop

blinking and the LCD display will show “Bluetooth Connected”.

Playing music from your mobile phone

1. Press the

On/Off button to turn on the radio.

2. Select Bluetooth mode by pressing the

Source button.

3. Start playing music by using the media players in the paired mobile phone.

4. Playback can be controlled from the mobile phone or by pressing the , and

buttons(presetbuttons3,4and5)ontheHandsfreeradio.

Answering an incoming phone call from the Handsfree radio

The Hands-Free-Calling feature allows you to answer an incoming phone call when

operating in the Bluetooth, DAB, FM or AUX IN mode.

1. Press the

Tuning knob (Phone icon) on the right to pick up an incoming call.

2. Speak towards the microphone located in the middle of the radio.

3. Adjust the conversation volume by turning the

Volume knob. A lower volume setting

can reduce a possible echo in the phone conversation.

4. Press the

Tuning knob (Phone icon) again to hang up the phone call.

Notes:ThevolumeoftheRingtonewillbeloudestfortherst20seconds,thenitwill

resume to the previous used level. Rotating the Volume knob or pressing the Tuning

knob (Phone icon) will also return the volume to the previous used level.

Redialing your last dialed phone number (of a paired mobile phone)

The Hands-Free-Calling feature allows you redialing your last dialed phone number on

yourmobilephone(Bluetoothmodeonly).

1. In Bluetooth mode, press and hold the

Tuning knob (Phone icon)

on the right for

more than 2 seconds. The last dialed phone number on your mobile phone will be

redialed.

2. Adjust the volume by turning the

Volume knob if necessary.

3. Press the

Tuning knob (Phone icon) again to hang up the phone call.

13 14

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

PerfectPro HF2U - Handsfree 2 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info