Bedienungsanleitung PerfectPro HF2U - Handsfree 2 (Seite 13 von 56) (Deutsch, Englisch, Holländisch, Französisch)

742386

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

BACKLIGHT

LCD backlight conguration

1. Press the

On/Off button

to turn on the radio.

2. Press the

Menu button

, and then rotate the

Tuning knob

until the display shows

“System”.

3. Press the

Tuning knob

; rotate the

Tuning knob

until the display shows “LCD

backlight”.

4. Press the

Tuning knob

to enter the LCD backlight adjustment menu.

5. Rotate the

Tuning knob

to select “on” in order to keep backlight always lightened

when the radio is turned on with AC power supply;

6. Or rotate the

Tuning knob

toselect“off”(bydefault)sothatthebacklightwillbe

lightened for about 10 seconds whenever a button is pressed with AC power

supply.

7. Press the

Tuning knob

toconrmyourchoice.

Note: The LCD backlight option “on” is only functional when the radio is powered

by AC power supply. When the radio is powered by battery power supply, the

LCD backlight is switched to option “off” – 10 seconds lightened when a button is

pressed. When the radio is connected to mains AC power again, the last user

setting will be applied again.

ATP PASSCODE

ThisradioisequippedwithanAnti-Theft-Protectionsystem(ATPsystem).Whenthe

ATP system is enabled, a passcode is required for turning on the radio.

1. Press the

On/Off button

to turn on the radio.

2. Press the

Menu button

3. Rotate the

Tuning knob

until the display shows “System”. Press the

Tuning knob

4. Rotate the

Tuning knob

until the display shows “Passcode”. Press the

Tuning

knob

. “Enable” or “Disable” will be displayed, to enable ATP, turn and press Tuning

knob to select “Enable”.

5. “Change Passcode” will be displayed, enter a 4-digits numeric passcode by

 pressingthepresetbuttons(1-10)

6. “ConrmPasscode”willbedisplayed.Enterasecondtimethesamepasscodeto

 conrm.

7. To disable passcode, select “Disable” as previously showed. And re-enter the

previous passcode to disable the lock.

When ATP is enabled, and if wrong passcode is entered for three times, a timer will be

activated. The next attempt will be possible only after the timer has elapsed. The timer

period will be increased with further wrong passcodes.

WARNING: If you choose to activate the passcode, please note your passcode

somewhere safe as a memory back-up in case you should forget it. This is

strongly advised, as there is no way to reset the radio should the passcode be

forgotten!

SOFTWARE VERSION

The software display cannot be altered and is just for your reference. You can only view

the software version in DAB and FM mode.

1. Press the

On/Off button

to switch on the radio.

2. Press the

Source button

to select FM or DAB mode.

3. Press the

Menu button

until the display shows “Full Scan”, and then rotate the

Tuning knob

until the display shows “System”.

4. Press the

Tuning knob

; rotate the

Tuning knob

until the display shows “SW

version”.

5. Press the

Tuning knob

to view the software version.

6. Press the

Tuning knob

to back to last menu and press menu to return to the

normal radio display.

Note

:Softwareupgradeshouldbedonebyqualiedservicepersonnel.

SYSTEM RESET

If the radio fails to operate correctly, or some digits on the display are missing or

incomplete, carry out the following procedure.

1. Press the

On/Off button

to switch on the radio.

2. Press the

Menu button

3. Rotate the

Tuning knob

until the display shows “System”. Press the

Tuning knob

4. Rotate the

Tuning knob

until the display shows “Factory reset”. Press the

Tuning

knob

5. Rotate the

Tuning knob

to select between “Yes” or “No”. Select “Yes” if you wish to

reset the radio, otherwise, select “No”.

6. Press the

Tuning knob

to cause the factory reset.

7. A full reset will be performed. All presets and the station list will be erased. All

settings will be set to the default values. The display will show “Restarting” for a

few seconds, and then the radio will automatically perform an auto scan of the Band

III DAB channels and the FM band, the display will show “Scanning” at DAB and

“Auto” at FM.

In case of malfunction due to electrostatic discharge; reset the product as above to

resume normal operation. If you are not able to perform the reset operation as above,

remove and reconnect all batteries and the power supply.

“Under the environment with Conducted Immunity disturbance / Radiated Immunity, the

sample may malfunction. It will automatically recover to normal when the Conducted

Immunity disturbance / Radiated Immunity stopped.”

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

PerfectPro HF2U - Handsfree 2 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info