Bedienungsanleitung PerfectPro PP800L - Powerplayer (Seite 8 von 65) (Deutsch, Englisch, Holländisch, Französisch)

742377

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

11 12

DAB MODE

Operating the radio

1. Carefully extend the antenna. Press the Power button to switch on the radio.

2. Ifthisisthersttimetoswitchon,theradiowillbeinDABmode.

3. Therststation(innumeric-alphaorder0…9…A…Z)inthelistofstationsfoundwill

be played. The display will show the station name.

If the radio has been used before, the last used station will be selected.

4. If no signals are detected, “No stations found” will be displayed. It may be

necessary to relocate the radio to a position giving better reception.

 Youshouldthencarryoutanautoscantondstations,pleaserefertothesection

“Find new stations - DAB”.

Selecting a station

1. Press the Power button to switch on the radio.

2. The display shows the name of the radio station currently selected.

3. Rotate the Tuning / Select knob to scroll through the list of available stations.

4. When the desired station name appears on the display, press the Tuning / Select

knob to select the station. The display will show the station name while playing.

Note: If after selecting a station the display shows “Service not available”, it may be

necessary to relocate the radio to a position giving better reception.

Secondary services

1. Certain radio stations have one or more secondary services associated with them.

If a station has a secondary service associated with it, then the secondary service

will appear immediately after the primary service as you turn the Tuning / Select

knob.

2. Press the Tuning / Select knob to select the secondary service.

Most of secondary services do not broadcast continually and if the selected service

is not available, the radio will re-tune to the associated primary service.

Display modes

In DAB mode, the radio can display a range of information on the display.

Press the Info button to cycle through the various modes.

a. Scrolling text Displays scrolling text message such as artist/track

name, phone in number, etc.

b. Program type Displays type of station being listened to e.g. Pop,

classic, News, etc.

c. Signal strength Displays the signal strength of radio reception.

  Theclearunlledrectangleindicatesminimum

signal level required for satisfactory reception.

d. Multiplex name & frequency Displays name of multiplex to which the current

station belongs. And to displays channel number

and frequency for the currently tuned DAB station.

e. Bit rate & audio type Displays the digital audio bit rate.

f. Date Displays the date of today.

Finding new stations

Should you wish to use your radio for DAB reception in a new location, or if no stations

were detected during the initial scan, you can follow this procedure to allow your

PowerplayertondoutwhichDABradiostationsareavailable.Also,fromtimetotime,

newstationsmaybecomeavailable.Youmayproceedtondnewstationsasfollows:

1. Press the Source button to DAB mode.

2. Press the Tuning / Select knob, the radio will perform a scan of the Band III DAB

channels.

As new stations are found, the station counter on the right-hand side of the display

will increase and stations will be added to the list.

Manual tuning

Manual tuning allows you to tune the radio directly to various DAB Band III channels.

1. Press the Menu button, the display shows “Manual tune”, then press the Tuning /

Select knob.

2. Rotate the Tuning / Select knob to select the desired DAB channel. Press the

Tuning / Select knob to tune the chosen frequency.

3. The signal strength display with an open bar shows the minimum signal strength

needed for good DAB reception. The signal strength bars will go up or down

showing the changing signal strength as you adjust the antenna or the radio

position.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

PerfectPro PP800L - Powerplayer Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info