Bedienungsanleitung PerfectPro RB2BT - Rockbox 2 (Seite 9 von 44) (Deutsch, Englisch, Holländisch, Französisch)

742406

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

AUX IN MODE

A 3.5mm stereo Aux In socket is provided on the side behind the rubber cover, for

connecting an external audio device such as MP3 player or CD player (not included with

this radio).

1. Connect an audio source to the Aux In socket.

2. Press the Source button to select AUX input. Display will show “AUX IN”.

3. Play the external player.

4. Adjust the volume of both the radio and the player for comfortable listening.

5. After use, close the rubber cover to prevent moist or dust from entering into the

sockets and radio.

Notes: Never use the AUX-IN socket in rainy or moist conditions to prevent moist from

entering the radio. Keep the rubber cover closed under these conditions.

The Auto-Power management function will be activated in AUX mode. If there is no

signal from the AUX input jack for a period over 15 minutes, the unit will automatically

switch to standby mode. The operation indicator and the LCD will go off in such case.

Pressing the On/Standby button will wake up the unit.

SETTING THE CLOCK

The clock can only be set when the radio is in standby mode. If no buttons are pressed

for 5 seconds, the radio will exit the clock setup and the setting is cancelled.

1. Press and hold the Time Set knobfor12secondsuntilthehourdigitsashonthedisplay.

2. Rotate the Time Set knob to set the hour.

3. Press the Time Set knobtoconrm,theminutedigitsash.

4. Rotate the Time Set knob to set the minute.

5. Press the Time Set knobtoconrm,thedayashesonthedisplay.

6. Rotate the Time Set knob to set the current day.

7. Press the Time Set knobtoconrm,themonthashes.

8. Rotate the Time Set knob to set the current month.

9. Press the Time Set knobtoconrm,theyearwillthenashonthedisplay.

10. Rotate the Time Set knob to set the current year.

11. Press the Time Set knobtoconrm,“SYNCLOCKON”ashes.

12. Rotary the Time Set knob to select “SYNCLOCK ON” or “SYNCLOCK OFF”.

13. Press the Time Set knobtoconrmandnishtheclocksetting.

RDS time synchronisation

If “SYNCLOCK ON” is selected, the symbol “ ” will show on the clock display.

Some RDS stations transmit a time signal. If reception is good and you have

selected the “SYNCLOCK ON” option during the time setting, the time will be

automatically updated (“ ”ashesonthedisplay).Timesynchronisationcantake

several minutes. The automatic time setting is always activated when the radio is

switched from standby to FM broadcasting and receives a RDS station.

1413

Device List – Connect to the paired device

In the radio, you can select the Bluetooth device from the Device list to connect again.

ThedevicenameswouldbeshownifthenameoftheBluetoothdeviceswerecongured

in the mobile devices. Please refer to the user manual of your mobile device for the

congurations.

The Device list can be checked as below:

1. In Bluetooth mode, press the Menu button to enter the system setting.

2. Rotate the Tuning knob until “Device list” is displayed; press the TUNING knob to

select the setting.

3. Rotate the Tuning knob to view the name of the devices.

4. Press the Tuning knob to start Bluetooth reconnection. The speaker will

automatically connect to this selected mobile device.

Note: There can be up to 8 device names stored in the Device list memory. If you store

more than 8 mobile devices into the Device list memory, the earliest paired device name

will be erased.

Note: If you have ever deleted the “PP RockBox 2” from your connected mobile phone

device, the auto reconnection will be unsuccessful.

Restart Bluetooth pairing

The Bluetooth function can be set to operate in different ways as below:

1. In Bluetooth mode, press the Menu button to enter the system setting.

2. Rotate the Tuning knob to select the “Disconnect BT” option, and press the

Tuning knob to select the setting.

3. The LCD display will show “Please wait” for a few seconds in order to disconnect

the current connection with the mobile phone device.

4. The LCD display will show “Not connected” and the radio’s Bluetooth is free for any

mobile phone device connection as it is in discoverable mode now.

Note: “Disconnect BT” is the option that forces the Bluetooth of this radio to disconnect

from your mobile phone and enter the “discoverable mode”. This is the way to allow

the Bluetooth pairing to another device. If no new device is paired, the Bluetooth will

automatically try to connect to the last device when it is switched off and on again.

The Auto-Power management function will be activated in Bluetooth mode. If there is no

signal* for a period of over 15 minutes, the radio will automatically

switch to standby mode. Pressing the On/Off button will wake up the unit.

* Also when the incoming signal from the external device is too low and cannot be

detected for a period of over 15 minutes by the Auto-Power management, the radio will

switch to standby mode.

To prevent this raise the output level on the external device enough to be detected.

PerfectPro RB2BT - Rockbox 2 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info