Bedienungsanleitung PerfectPro SLIM 2 (Seite 8 von 55) (Deutsch, Englisch, Holländisch, Französisch, Norwegisch)

742547

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

1413

PRESET STATIONS

Storing preset stations

There are 5 memory presets in the radio, 5 for DAB and 5 for FM. Presets are

remembered by the radio in the event of a power failure.

1. Press the ON/OFF button to turn on the radio.

2. Press the SOURCE button to select the desired waveband.

3. Tune to the required station.

4. Press and hold the required PRESET button until the radio beeps and shows for

example “Preset 01 Stored”.

5. Repeat step 3 and 4 for the remaining presets.

6. Stations stored in the preset memories can be over-written by following the above

procedure.

Recalling preset stations

1. Press the ON/OFF button to turn on the radio.

2. Press the SOURCE button to select the desired waveband.

3. BrieyPresstherequiredPRESET button, the display will show, e.g. "P1", in the

 rstline.

USING BLUETOOTH

Pairing Bluetooth with your mobile phone

1. Press the ON/OFF button to turn on the radio.

2. Select Bluetooth mode by pressing the SOURCE button.

3. The LCD display will show “Not connected” when radio is not yet paired with your

mobile phone. Also the blue Bluetooth LED on the front panel will be blinking at

this moment.

4. In your mobile phone open the Setting menu and select Bluetooth, then select “PP

Slim 2” in the Bluetooth devices list (Bluetooth pairing instructions may vary per

type of mobile phone, please check your mobile phone manual).

5. When Bluetooth pairing is successful, the LCD display will show “Bluetooth

Connected” in the 1st line, and your mobile’s name in the 2nd line for about 2

seconds.

And the blue Bluetooth LED on the front panel will stop blinking when the radio is

connected to a mobile phone.

6. After all, the LCD display will show the connected mobile phone’s name in the 1st

line to indicate the connected device to the radio.

Playing music from your mobile phone

1. Press the ON/OFF button to turn on the radio.

2. Select Bluetooth mode by pressing the SOURCE button.

3. Start playing music by using the media players in the paired mobile phone.

4. Playback can be controlled from the mobile phone or by pressing the REWIND,

FAST FORWARD, and PLAY/PAUSE buttons (preset buttons 3, 4 and 5) on the

radio.

5. After music playback starts, the name of the song will be displayed in the LCD.

Display modes – Bluetooth

In Bluetooth mode, the radio can display a range of information of the current playing

music on the display. Press the INFO button to cycle through the various types.

a. Title Displays scrolling song’s name of the current playback music.

b. Artist Displays the artist’s name of the current playback music.

c. Album Displays the album name of current playback music.

d. Status Displays the playback status. E.g. playing or stopped.

e. Music info Displays the music format and sampling rate of current playing

song. E.g. “AAC” is the format of the song; “44100Hz” is the

sampling frequency of the song.

f. Time & date Displays the current time and date.

Restart Bluetooth paring

The Bluetooth function can be set to operate in different ways as below:

1. In Bluetooth mode, press the MENU button to enter the system setting.

2. Rotate the TUNING/SEEK knob to select “Disconnect BT” options, and press the

TUNING/SEEK knob to select the setting.

3. The LCD display will show “Please wait” for a few seconds in order to disconnect

the current connection with the mobile phone device.

4. The LCD display will show “Not connected” and the radio’s Bluetooth is free for any

mobile phone connection as it is in discoverable mode now.

The blue Bluetooth LED on the front panel will be blinking at this moment.

Note: “Disconnect BT” is the option that forcing the Bluetooth of this radio to disconnect

from your mobile phone and enter the “discoverable mode”. This is the way to allow

the Bluetooth pairing to another device. If no new device is paired, the Bluetooth will

automatically try to connect to the last device when it is switched off and on again.

The Auto-Power management function will be activated in Bluetooth mode. If there is no

signal* from Bluetooth for a period of over 15 minutes, the radio will automatically switch

to standby mode. Pressing the ON/OFF button will wake up the unit.

* Also when the incoming signal from the external device is too low and cannot be

detected for a period of over 15 minutes by the Auto-Power management, the radio will

switch to standby mode.

To prevent this raise the output level of the external device enough to be detected.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

PerfectPro SLIM 2 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info