Bedienungsanleitung PerfectPro Slim 3 (Seite 9 von 70) (Deutsch, Englisch, Holländisch, Französisch, Norwegisch)

742518

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

1413

FM MODE

Operating the radio – FM seek station

1. Press the ON/OFF button to turn on the radio.

2. Select the FM waveband by pressing the SOURCE button.

3. IfthisisthersttimetoswitchtoFMmode,thestationinpreset1willbeplayed.

If the radio has been used before, the last listened station will be played.

4. To seek a station, press the TUNING/SEEK knob. The scan stops automatically

 whenitndsastationofsufcientstrength.

5. After a few seconds, the display will update and show the station name if RDS

information is being received.

6. Tondotherstations,presstheTUNING/SEEK knob again.

7. To seek station in an opposite direction, rotate the TUNING/SEEK knob clockwise

(to scan from low frequency to high frequency) or rotate anti-clockwise (to scan

from high frequency to low frequency), and press the TUNING/SEEK knob.

8. When the waveband end is reached, the radio will recommence tuning from the

opposite waveband end.

Manual tuning – FM

1. Press the ON/OFF button to turn on the radio.

2. Select the FM band by pressing the SOURCE button.

3. Rotate the TUNING/SEEK knob to reach the required FM station.

The radio will change the frequency in steps of 50 kHz.

4. Rotate the rubber antenna to get the best reception. If the radio is tuned to a station

 ofsufcientsignalstrengthwithRDSinformationpresent,thedisplaymaychange

to show the station name.

5. When the waveband end is reached, the radio will recommence tuning from the

opposite waveband end.

RDS station service – FM

RDS (Radio Data System) is an information system which inaudible digital information

is transmitted in addition to the normal FM radio program. When the radio is receiving a

RDSstationandthereceptionstrengthissufcient,thestationnamewillappearinthe

display. It may take some time before the RDS information is available.

Calling up RDS information

When you are listening to a FM station with RDS system, repeatedly press the INFO

button to cycle through the information. This will only function if the reception level is

sufcientandclear.

a. Radio text (RT) Displays the message about the station being listened

to as ticker text.

b. Program type (PTY) Displays the type of station being listened to, e.g. Pop,

Classic, News, etc.

c. Frequency Displays the frequency of the station being listened to.

d. Signal level Displays the signal strength.

e. Time & date Displays the current time (24 hour clock) and date.

Scan sensitivity setting – FM

The radio will normally scan all stations from FM broadcasts including the weaker

signals.However,youmaywishtheAuto-scantondonlythosestationswithstrong

enough signals to give good reception.

1. Press the ON/OFF button to turn on the radio.

2. Select the FM band by pressing the SOURCE button.

3. Press the MENU button, the display shows “Scan setting”.

4. Press the TUNING/SEEK knob.

5. Rotate the TUNING/SEEK knob to select between “All stations” or “Strong station”

(default is Strong stations).

 The“Strongstation”optionwillallowtheradiotondstrongsignalsonlywhen

scanning.

6. Press the TUNING/SEEK knobtoconrmyoursetting.Thedisplaywillreturnto

normal radio display.

PRESET STATIONS

Storing preset stations

There are 5 memory presets in the radio, 5 for DAB and 5 for FM. Presets are

remembered by the radio in the event of a power failure.

1. Press the ON/OFF button to turn on the radio.

2. Press the SOURCE button to select the desired waveband.

3. Tune to the required station.

4. Press and hold the required PRESET button until the radio beeps and shows for

example “Preset 01 Stored”.

5. Repeat step 3 and 4 for the remaining presets.

6. Stations stored in the preset memories can be over-written by following the above

procedure.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

PerfectPro Slim 3 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info