Bedienungsanleitung PerfectPro TBox2 - TOUGHBOX 2 (Seite 12 von 57) (Deutsch, Englisch, Holländisch, Französisch)

742525

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

Setting tuning step-FM/AM

1. Press and hold the Menu button to enter the menu setting.

2. Rotate the Tuning control until “FACTORY” shows on the display. Press the Tuning control to enter

the setting menu.

3. Rotate the Tuning control until ‘FM X K’ or ‘AM X K’ shows on the display. Press the Tuning control

to enter the setting.

4. Rotate the Tuning control to choose the desired FM tuning step (50 kHz or 100 kHz) or AM tuning

step (9 kHz or 10 kHz). Press the Tuning control to conrm the setting.

Note:

Re-setting the AM tuning step will erase all the preset AM stations.

Soft Mute (S-MUTE)

Soft Mute is to reduce background noise during weak signal, however it will also reduce radio recep-

tion. The initial setting for Soft Mute is ON. Soft Mute can be set either radio is on or off.

1. Press and hold the Menu button to enter the setting menu.

2. Rotate the Tuning control until “SOFTMUTE” is shown on the display. Press the Tuning control to

enter the setting.

3. Rotate the Tuning control to select “ON” or “OFF”, then press the Tuning control to conrm the

setting.

Treble/Bass control

You may set up a custom treble and bass as following.

1. Press and hold the Tone control until “TREBLE” appears on the display.

2. Rotate the Tone control to adjust the treble level (between-5 and+5). The sound will change as you

adjust the level. Press the Tone control to conrm the setting. Now you can adjust Bass control.

3. Rotate the Tone control until the desired bass level (between -5 and +5) is displayed. The sound

will change as you adjust the level. Press the Tone control to conrm the setting.

Loudness

The Loudness function enables to get compensation on lower and higher frequency. The effect will

be more audible when the radio is in a lower volume level (Dynamic Loudness).

1. Press the Loudness button to turn on the loudness function. In the display the “Loudness”

indicator will be shown.

2. To turn off the loudness function, press the Loudness button again. The “Loudness” indicator will

not be shown anymore.

Auxiliary input socket

A 3.5mm Auxiliary Input socket is provided on the right side of your radio to permit an audio signal to

be fed into the unit from an external audio device such as iPod, MP3 or CD player.

1. Repeatedly press and release the Source button until “AUX IN” is shown on the display.

2. Connect an external audio source (for example, iPod, MP3 or CD player) to the Auxiliary Input

socket.

3. Adjust the volume setting on your iPod, MP3 or CD player to ensure an adequate signal level from

the player, and then rotate the Volume control on the radio as needed for comfortable listening.

Note: Never use the Aux-In socket in rainy or moist conditions to prevent moist from entering the ra-

dio. Always keep the rubber cover on the side well closed under these conditions.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

PerfectPro TBox2 - TOUGHBOX 2 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info