Bedienungsanleitung PerfectPro TBX1 - Teambox (Seite 9 von 54) (Deutsch, Englisch, Holländisch, Französisch)

742393

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

13 14

Display modes

When you are listening to a FM station with RDS system, repeatedly press the Select /

Info button to cycle through the information. This will only function if the reception level

is sufcient and clear.

a. Radio text Displays the message about the station being listened to as

ticker text.

b. Program type Displays the type of station being listened to, e.g. Pop,

Classic, News, etc.

c. Signal strength Displays signal strength for the station being listened to.

d. Frequency Displays the frequency of the station being listened to.

e. Date Displays the date of today.

Scan sensitivity setting

The radio will normally scan all stations from FM broadcasts including the weaker

signals. However, you may wish the Auto-scan to nd only those stations with strong

enough signals to give good reception.

1. Press the Power button to turn on the radio.

2. Select the FM band by pressing the Source button.

3. Press the Menu button, the display shows “Scan setting”; Then press the Select /

Info button to enter.

4. Press the Tuning << or Tuning >> button to select between “All stations” or

“Strong stations only” (default is “Strong stations only”).

The “Strong station” option will allow the radio to nd strong signals only when

scanning.

5. Press the Select / Info button to conrm your setting. The display will return to

normal radio display.

PRESET STATIONS

Storing preset stations

There are 20 memory presets in the radio, 10 for DAB and 10 for FM. Presets are

remembered by the radio in the event of a power failure.

1. Press the Power button to turn on the radio.

2. Press the Source button to select the desired waveband.

3. Tune to the required station.

4. Press and hold the Preset button until the display shows for example “Preset 01:

Empty”.

5. Press the Tuning << or Tuning >> button to select the desired preset number,

then press the Select / Info button to conrm saving preset. The display will show,

for example, “Preset 01 Stored”.

6. Repeat step 3 to 5 for the remaining presets.

7. Stations stored in the preset memories can be over-written by following the above

procedure.

Recalling preset stations

1. Press the Power button to turn on the radio.

2. Press the Source button to select the desired waveband.

3. Press the Preset button until shows for example “Preset 01: 88.10MHz”.

4. Press the Tuning << or Tuning >> button to select the desired preset number,

then press the Select / Info button to recall the preset.

5. The display will show, e.g. “P01”, at the end of rst line.

BLUETOOTH

The Bluetooth mode on your Teambox allows you to play audio, play sound from video

les and stream music from Bluetooth capable devices such as your mobile phone,

computer, tablet etc. through your Teambox loudspeaker.

•

When a Bluetooth enabled device such as your Teambox is in a ‘discoverable’

state other Bluetooth devices can detect, pair with or connect to it.

•

‘Bluetooth pairing’ occurs when two Bluetooth enabled devices agree to establish a

connection and communicate with each other.

Bluetooth connectivity performance may vary depending on the connected Bluetooth

devices. Please refer to the Bluetooth capabilities of your device before connecting to

your Teambox. All features may not be supported on some paired Bluetooth devices.

A Bluetooth connection can provide a link for audio up to a distance of approximately ten

metres. When pairing two Bluetooth enabled devices, for convenience, we recommend

they should be no more than 2 to 3 metres apart. The presence of other functioning

Bluetooth devices during connection may lead to operational difculties.

Bluetooth is a short-range radio communication system and generally Bluetooth devices

can communicate with each other clearly within a regular sized room or ofce. The

reliability of a Bluetooth connection between different rooms will greatly depend upon

the construction of the building.

Bluetooth communication range may be substantially reduced if the signal passes

through a solid object. Human bodies, brick and concrete walls, heavy furniture or

bookcases will all reduce the operational range of your Bluetooth devices to a greater

or lesser extent. Glass, dry-wall or wood panelled walls and ofce partitions may have

a less severe but noticeable effect. Metal pipes, foil-lined plasterboard, metal window

frames and domestic wiring can also have an effect. You should position your Bluetooth

devices closer to each other if you observe communication difculties.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

PerfectPro TBX1 - Teambox Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info