Bedienungsanleitung Peruzzo Siena 668 (Seite 9 von 33) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

807421

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

ASSEMBLY AND USER INSTRUCTIONS

Whenever this product is used the following information must be

taken into consideration: the bike rack is a safe product if used

correctly, whereas if it is used incorrectly it can cause damages

to you and to anyone driving behind you.

1) Insert the end plugs 32 in the square bearing tubes 25-26 (Fig. A).

2) Insert the end plugs 23 in the bike carrier bars 27 (Fig. A) and in the

bike xing arch 31 (Fig. D2).

3) Mount the tyre cradles 21 on the bike carrier bar 27 in the most suita-

ble positions for the dimensions of your bike and x them with the

screws 22, nuts and washers 53 (Fig. A).

4) Fix the carrier bars 27 to the square bearing tubes 25-26 with the

screws, nuts and washers 54 (Fig. A).

5) Fix the square tube 24 of the light bar 17 to the square bearing tubes

25-26 with the screws, washers and nuts 51 (Fig. A).

6) Mount the rear lights 18 on the light bar 17 and x them with the

washers and nuts 55 (Fig. B) while taking care not to damage the wires.

Thread the 13 pin plug through the central hole of the light bar 17.

7) Fix the number plate frame 19 to the light bar 17 with the screws 56.

8) Fix the light bar assembly 17 to the square tube 24 with the screws 20,

the nuts and the washers 52; make sure you thread the tilt hook 5 into

the slot provided (Fig. C).

9) Mounting the bike xing arch 31:

- Unscrew and remove the knobs 36 and the washers 57 from both

sides (Fig. D1);

- Carry out the operations 1 and 2 (Fig. D2);

- Place the bike xing arch 31 in the half pipe of the tilt adjustment

element 33, then x it with the washers 57 and the knobs 36 (Fig. D2).

HOW TO INSTALL THE BIKE RACK ON THE

TOWING HOOK

To mount the bike rack in safety and to avoid damaging the vehicle, you

should request the help of another person.

10) Remove the safety screw 13 from the xing block 50 (Fig. E).

11)Unscrew the screw 8 until the hemisphere 14 (Fig. E) is completely

open.

12) Apply the xing block 11 with the hemisphere open 14 to the hitch ball

58 (Fig. F) .

13) Tighten the screw 8 with the wrench provided 12 until the hemisphere

14 is secured to the hitch ball 58 (the manual force should be equal to at

least 40 Kg.) (Fig. F).

IMPORTANT:

Lastly mount the safety screw 13 to the xing block 50

(Fig. F) to avoid any accidental openings.

ONLY FOR ART. 668/4

14) Attach the strap hooks 40 to the edges of the vehicle hatch, then insert

the straps in the buckles 39 (make sure the inlet direction is correct)

(Fig. F1).

IMPORTANT

: Give the straps a good tug to check for tightness. Check the

tightness before starting and during the trip.

POSITIONING and FIXING the BIKES ON

THE BIKE RACK

15) Place the biggest and heaviest bike on the bike rack rst, position the

wheels in the tire cradles 21 and lean it up against the bike xing arch

31. Secure the bike to the bike xing arch 31 with the xing strap 30

(Fig. H1). Secure the wheels by means of the xing straps 37 (Fig. G).

Check that the belts are mounted correctly by pulling on them.

16) Repeat the operations in 15 for the second, third and fourth bikes. The

second and third bikes are secured to the xing arch 31 with the xing

arms 15/16 (Fig. H1), whereas the fourth bike is secured to the third

bike with xing arm 41 (Fig. H2).

IMPORTANT

: For safe transportation of the load the bike carrier is

supplied with a strap 38 for tying all the bikes to the xing arch 31.

Check that the belt is mounted correctly by pulling on it.

BIKE RACK INCLINATION (Fig.I/L/M)

17) To tilt the bike rack hold it up with one hand while you pull the hook

5 with the other (Fig. I/L).To avoid injury or damage, this operation

of tilting the bike rack should be carried out with the help of a third

person. To close the bike rack lift it until the tilt hook 5 engages

securely in the transit position (Fig. M).

As well as the information described below please observe the

Conditions, suggestions and limits for use

" specied in the EC

type test certicate.

- Weight and maximum capacity of "SIENA" bike racks:

* Model 668 (10,85 kg) - 669 (10,65 kg) ---> 2 bikes, max.

capacity 34 kg.

* Model 668/3 (13,56 kg) - 669/3 (13,33 kg) ---> 3 bikes, max.

capacity 51 kg.

* Model 668/4 (15,93 kg.) ---> 4 bikes, max. capacity 60 kg.

- Never exceed the permitted capacity of the towing hook installed. The

combined weight of the bike rack and the load must never exceed the

permitted capacity. Keep the towing hook ball surface clean from dirt

and oil.

- The driver is always responsible for the load he is transporting and

consequently he is also responsible for checking the fastenings both

before starting the trip and at regular intervals during the trip.

- Check the car manual for the specications concerning the maximum

permissible rear axle weight.

- Verify compliance with the value D (maximum load bearing capacity)

of the towball specied by the car or towball manufacturer; the value

D for the towball must be at least (760 Kg) 7.6kN; older towballs

often only specify the permissible load on the towball GA and the

total permissible load of the towing vehicle GK rather than value D; in

this case the value D can be calculated using the values specied in

the vehicle maintenance or registration booklet:

- Remove from the transported bikes children's seats, transport

baskets, rain covers or other elements that could get lost or increase

the air resistance.

- Do not carry more bikes than the number indicated for a specic

model.

- Bike parts, such as for example the handlebars or pedals, must not be

left in the normal position of use; they must be folded to avoid

dangerous projections.

- Ensure that the bike rack is tted correctly on the towing hook and

that the bikes are secured as instructed.

- The bike rack is only suitable for transporting bicycles.

ATTENTION – SAFETY REQUIREMENTS

D = x

9,81 (GA x GK)

1000 (GA + GK)

(D in [kN] / GA in [kg] / GK in [kg])

Peruzzo Siena 668 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Peruzzo Siena 668

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info