Bedienungsanleitung Pet-Mate Cat-Mate Elite 355 Cat flap (Seite 6 von 23) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

782694

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

8.4.2 Repeatedly press the '4 WAY' button to select the required access options from:

'IN & OUT', 'IN ONLY', 'OUT ONLY', 'LOCKED' or 'OFF'.

8.4.3 Press the 'PROG' button to save the setting.

8.4.4 The display will show time with the Minute symbol flashing. Repeatedly press

the '+' button until the current Minutes setting is shown (i.e. 10 if the current time

is 12:10).

8.4.5 Press the 'PROG' button to save the setting.

8.4.6 The display will now show the time with the Hour symbol flashing.

If you wish to change between a 24 hour clock and AM/PM setting, press the

'TIMER' button.

8.4.7 Repeatedly press the '+' until the correct Hour setting is shown (e.g. 12 if the

current time is 12:10).

8.4.8 Press the 'PROG' button to save the setting.

8.4.9 The display will show the word 'START' and the minutes will flash. Press the

'+' button until the desired minutes setting is shown, (in the above example

'00'). Press the 'PROG' button to save the setting.

8.4.10 Then set the hours in the same way (in the above example 19:00).

8.4.11 The display will show the 'FINISH' time. Set in the same way as the 'START'

time. Remember to press 'PROG' to save the setting.

When the Timer is set, the Timer function indicator ( 5 , Fig. 1) will be shown on the

display.

When the timed lock is active, the access option symbol chosen at 8.2 will flash slowly.

To check the time settings, briefly press the 'TIMER' button and release. The display

will show the timed access option selected and the 'START' time. Press the 'TIMER'

button again to show 'FINISH' time. The display will revert to current time after 5

seconds.

To cancel timer control and revert back to the normal access option:

8.4.12 Press the 'TIMER' button for 5 seconds.

8.4.13 Press the '4 WAY' button and go back through the options until you come to

'OFF'.

8.4.14 Press the 'PROG' button 3 times to keep the current clock time and return to

the normal display.

9. Battery Replacement

When the low battery indicator ( 3 , Fig. 1) comes on, alkaline batteries should be

replaced. (See Section 2).

Please note, after fitting new batteries:

• Low battery indicator may remain on for up to 15 minutes.

• Flap will remember all microchip(s) and I.D. Disc(s), Lock Settings and Lock Times

but CURRENT TIME WILL NEED RESETTING. (See section 8.4).

7. To View How Long Since the Cat(s) Last Used the Cat Flap

7.1 To view how many hours

and minutes

since cats 1, 2 or 3 last used the cat flap,

press the '+' button.

7.2 The display will show the symbol for 'CAT 1' and how many hours

and minutes

ago 'CAT 1' used the flap up to a maximum of 99 hours.

7.3 Press '+' again for similar information on Cats 2 and 3.

7.4 Press '+' a fourth time (or leave for 20 seconds) and the normal display will be

resumed.

8. Access Options

The access options available are shown below.

'In & Out' Your cat(s) can come in and out of the flap

'In Only' Your cat(s) can come in through the flap but cannot leave through

the flap

'Out Only' Cat(s) can go out through the flap but cannot enter through the flap

'Locked' Cat(s) cannot use the flap

Select an access option as follows:

8.1 Press and hold the '4 WAY' button for 5 seconds until the display flashes.

8.2 Repeatedly press the '4 WAY' button to scroll through the available access

options, until you come to the one you want.

8.3 Press the 'PROG' button to save the setting.

8.4 Setting Timer Control/Clock for ALL Cats

If you wish to set your cat flap to ensure that ALL cats have a particular access option,

over a selected timed period, e.g. to keep your cat(s) in at night between 19:00 and

06:00, you will first need to decide:

a) Which lock setting should apply DURING the timed period, (in the above example

'IN ONLY' will apply). Outside the timed period, the lock setting made in 8.1 to 8.3

will apply.

b) When the timed period should 'START' (In the above example 19:00hrs).

c) When the timed period should 'FINISH' (in the above example 06:00hrs).

d) You will also need to know the current time.

Proceed as follows:

NOTE: if you do not press a button for more than 60 seconds the display will revert to

normal and you will need to start again.

8.4.1 Press the 'TIMER' button for 5 seconds until the Timer function indicator

flashes. 10 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pet-Mate Cat-Mate Elite 355 Cat flap Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info