Do not place the appliance •
on a hob.
Do not place the appliance •
on hot surfaces or near open
flames.
Make sure that the appliance •
does not come into contact
with flammable material.
Keep the appliance away •
from heat sources.
Be careful with hot water •
and steam to avoid burns.
Cleaning and maintenance
Warning!
- Before cleaning or maintenance, switch off
the appliance and remove the mains plug
from the wall socket.
- Do not immerse the appliance in water or
other liquids.
Caution!
- Do not use aggressive or abrasive cleaning
agents to clean the appliance and the
various parts of the appliance.
Regularly check the appliance for possible •
damage.
Clean the outside of the appliance with a •
soft, damp cloth. Thoroughly dry the
outside of the appliance with a clean, dry
cloth.
Clean the accessories after each use:•
- Clean the coffee pad cassette and the
ground coffee cassette in soapy water.
- Clean the dispenser cassette and the
coffee dispenser filter in soapy water.
- Clean the water reservoir and the lid of
the water reservoir in soapy water.
- Clean the cup tray and the drip tray in
soapy water.
- Rinse the accessories under running
water.
- Thoroughly dry the accessories with a
clean, dry cloth.
Rinsing the appliance (fig. A - C)
The appliance must be rinsed if it has not been
used for a couple of days. Always start rinsing
the appliance directly after switching on in
order to decrease energy consumption.
Warning!
- Be careful with hot water and steam to
avoid burns. Hot steam can escape from
the coffee dispenser during the process.
- Before rinsing the appliance, make sure
that the water reservoir is placed in the
appliance.
Rinse the water reservoir (12).•
Fill the water reservoir (12) with water up •
to the maximum mark ("MAX") on the
water level indicator (13).
Place the water reservoir (12) into the •
appliance.
Insert the coffee pad cassette (11) into the •
appliance.
Set the locking collar (7) to position 'A'.•
Place two large cups next to each other •
onto the cup tray (14).
Press the on/off button (1) to switch on •
the appliance.
Keep both start/stop buttons (2/3) pressed •
simultaneously to start the rinsing process.
The ready-to-brew indicator (5) lights red.
If the process is completed, set the locking •
collar (7) to position 'B'.
Cleaning the coffee dispenser filter
(fig. A)
The quality of the cream layer reduces when
the coffee dispenser filter is clogged by
calcium or coffee residue. The coffee dispenser
filter must be cleaned regularly.
Caution!
- If the two filters of the coffee dispenser
filter are pressed against each other,
replace the coffee dispenser filter.
