The appliance is not intended to be operated •
by means of an external timer or separate
remote-control system.
Connect the appliance to an earthed wall •
socket. If necessary, use an earthed
extension cable of a suitable diameter
(at least 3 x 1 mm
2
).
For additional protection, install a residual •
current device (RCD) with a rated residual
operating current that does not exceed
30 mA.
Make sure that water cannot enter the •
contact plugs of the mains cable and the
extension cable.
Always fully unwind the mains cable and the •
extension cable.
Make sure that the mains cable does not hang •
over the edge of a worktop and cannot be
caught accidentally or tripped over.
Keep the mains cable away from heat, oil and •
sharp edges.
Do not use the appliance if the mains cable or •
the mains plug is damaged or defective. If the
mains cable or the mains plug is damaged or
defective, it must be replaced by the
manufacturer or an authorised repair agent.
Do not pull the mains cable to disconnect the •
mains plug from the mains.
Disconnect the mains plug from the mains •
when the appliance is not in use, before
assembly or disassembly and before cleaning
and maintenance.
Safety instructions for blenders
Do not use the appliance outdoors.•
Place the appliance on a stable and flat •
surface.
Keep the appliance away from heat sources. •
Do not place the appliance on hot surfaces or
near open flames.
Do not use the appliance for pressing fruits or •
vegetables.
Do not use the appliance for beating eggs.•
Do not use the appliance for kneading dough.•
Do not use the appliance for grinding meat.•
Do not use the appliance with an empty jar.•
Always mount the jar lid and the jar lid insert •
before switching on the appliance.
Do not leave the appliance switched on •
continuously for more than three minutes.
Make sure that your hands are dry before •
touching the appliance.
Beware of sharp parts. Keep your hands away •
from the moving parts during use and during
cleaning and maintenance. The appliance
uses a sharp knife in the bottom of the jar.
Beware of hot parts. Wait until the appliance •
has cooled down before touching the
housing and the parts of the appliance.
The appliance becomes hot during use.
Be extra careful during cleaning and •
maintenance. Be extra careful when emptying
the jar or handling the sharp blade.
Do not leave the appliance unattended •
during use.
U.K. Wiring instructions
The wires in the mains lead are coloured in
accordance with the following code:
BLUE NEUTRAL
BROWN LIVE
As the colours of the wire in the mains lead of this
appliance may not correspond with the colour
markings identifying the terminals on your plug,
proceed as follows:
The wire which is coloured BLUE must be
connected to the terminal which is marked
with the letter N or coloured black.
The wire which is coloured BROWN must be
connected to the terminal which is marked
with the letter L or coloured red.
If a 13Amp (BS1363) plug is used, a 3Amp
(BS1362) fuse must be fitted, or if any other type
of plug is used, a 13Amp fuse must be fitted,
either in the plug or adaptor, or on the
distribution board.
This is a double-insulated appliance and does not
need an earth connection.
Warning! On no account should either the live
or neutral wires be connected to the earth
terminal.
Disclaimer
Subject to change; specifications can be
changed without further notice.