Bedienungsanleitung Petsafe PAC00-12893 (Seite 14 von 28) (Englisch)

771304

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

14 Customer Care Center 1-800-732-2677

TRAINING GUIDE

Test the Remote Trainer

We recommend you experience ﬁrst-hand how the Remote Trainer functions. Always begin at the lowest level

and increase the intensity up to your personal comfort level.

1. Place your ﬁngers on both Vibration Points of the Receiver Collar.

2. Hold the Handheld Remote approximately 2 feet from the Receiver Collar and press the Vibration Up

Button (+) to show Level 1 on the Digital Display. Press the Vibration Button (Blue). At this level you may not

feel the Vibration Stimulation. Note: An automatic safety time-out will be triggered if any Vibration Button

is held for more than 10 seconds. Once released, the Vibration Button resets to normal functionality.

3. Increase the intensity until the sensation begins to feel uncomfortable.

General Tips

Introducing the Remote Trainer: Introduce your PetSafe® Receiver Collar when your dog graduates from

puppy stage and understands basic obedience commands. PetSafe® Receiver Collars should only be used

with pets who are over 4 to 6 months of age.

Avoiding a “Collar Wise” dog: Try to avoid letting your dog become “collar wise”, obeying only when

wearing the PetSafe® Receiver Collar. Similarly, avoid letting the dog learn to obey only when seeing the

Handheld Remote in your hand. This is easy to prevent (see “Remain the Leader” in the “Dog Training

Recommendations” section).

Training Sessions & Determining Stimulation Levels: Keep your training sessions short and watch your

dog’s reaction - your pet will tell you what level of Vibration is appropriate to use and when to release the

button. Please refer to “Find the Best Vibration Level for Your Pet” for additional information.

Stopping Unwanted Behavior: When stopping unwanted behavior, it is suggested to use higher levels

of Vibration - the pet should be convinced that his unacceptable actions (not you) caused the annoying

sensation to happen.

Dogs First Learn One Command: Focus on learning one command before moving on to another. When

teaching a command like “heel”, “come”, “sit”, or “down”, many trainers recommend using low levels of

Vibration. The dog quickly learns to turn off or completely avoid the unpleasant sensation.

Reinforcing Known Commands: To reinforce commands the dog already knows, it is suggested to use

medium Vibration levels. This teaches the dog to respect instructions by always listening and obeying.

Note: Using praise or treats to reward the correct response is great for encouraging the dog, but it is

suggested you and your family members always remain the dog’s leader.

Never use the Remote Trainer to correct or eliminate any form of aggressive behavior.

We recommend you contact your local veterinarian or professional trainer to determine if

your pet might be aggressive.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Petsafe PAC00-12893 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info