Bedienungsanleitung Petsafe PAL00-15342 (Seite 13 von 20) (Englisch)

771317

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

www.petsafe.net 13

Maximizing Litter Tray Life

Here are some tips to help get the most life from the Disposable Crystal Litter Tray.

• ScoopFree® Disposable Litter Trays work best if placed AWAY from areas of high humidity such as bathrooms,

showers, and basements. Moisture in the air can shorten the life of the crystal litter and disposable tray. Place in a

room with moving air to pull away moisture, such as a room with a fan.

• Cats with diets high in crude ﬁber and ash content will produce more solid waste. This may prematurely ﬁll the waste

trap. Consider changing the cat’s diet to a food with no byproducts or ﬁllers.

• Increased elimination habits of older cats and cats with diabetes, kidney and thyroid problems may result in a shorter

tray life.

• Stirring litter crystals once a week may help the tray life for cats that are ill or have a high urine output. Stirring will

also distribute saturated crystals, which will also help with cats consistently urinate in the same spot or do not dig. Be

sure to mix in the crystal litter from behind the rake and along the sides of the litter box. DO NOT mix in litter from

under the waste trap.

• Kittens are not as developed so their solid waste can be runny. Kittens will go through litter trays faster than adult

cats. It is recommended to use ScoopFree with cats that are older than 6 months.

If your kitten is under 6 months of age, leave the unit UNPLUGGED and scoop waste until kitten is 6

months old.

Care and Cleaning

The ScoopFree Self-Cleaning Litter Box seldom needs cleaned because of its revolutionary design. Surfaces that

would normally become soiled are discarded with each Disposable Crystal Litter Tray. However, you may occasionally

choose to clean the litter box.

Do not submerge or expose the electrical components to water or cleaning solutions.

Always unplug the unit when not in use, before putting on or taking o parts, and before cleaning.

To Clean:

1. Unplug power adapter from wall outlet and disconnect from the litter box.

2. Lift and remove the litter box frame from the crystal litter tray.

3. Remove waste trap cover by tilting it outwards until the side posts fall out of

the slots on the front of the litter box frame.

4. Wipe all surfaces on the litter box frame with a cloth or sponge using mild

soap and water. Wipe rake with sponge or soft brush. DO NOT use bleach

or chemicals to clean as they can act as a repellent to your cat.

5. Clean the Detection Sensors on the interior sides of the litter box frame to

make sure they are not blocked.

6. Thoroughly dry all parts before reassembling the litter box.

To Reassemble:

1. Install the waste trap cover by sliding the posts on the side of the cover into

the slots on the front of the litter box frame.

2. Install the litter tray (see “Litter Tray Installation” page 8).

Detection

Sensor

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Petsafe PAL00-15342 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info