Bedienungsanleitung Petsafe PDT00-13913 (Seite 7 von 11) (Englisch)

771306

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

12 Customer Care Center 1-800-732-2677 www.petsafe.net 13

General Tips

:Never inﬂict punishment, pain or cruelty on your pet – even if he refuses to listen.

:Reward your pet when he listens and obeys your commands.

:Never let the dog ignore a command he understands.

:Do not use the spray when you want your dog to obey a command that he does not

understand yet.

:Never ﬁll the device while your dog is wearing it because it may damage the ﬁll-up valve.

:Never fasten a leash (lead) to the PetSafe® Spray Commander™ collar.

:To ensure that your dog does not make the connection between you and the PetSafe®

Spray Commander™, don’t let him see you prepare the device, neither for the ﬁrst try, nor for

subsequent use. Keep your dog away while you prepare the device as well as when you ﬁll it

or change the battery.

:Make sure the device is always ready to function, should the dog display undesirable behavior.

We recommend that you verify the device every day to make sure it contains enough spray.

:Put the collar around the dog’s neck at least 20 minutes before the training session begins so

that the dog doesn’t associate wearing the spray collar with the exercises.

Note: To save battery power, turn off the device while not in use.

Teaching Basic Obedience

The “Sit” Command

1. Put a separate, non-metallic collar on your pet’s neck BELOW the Receiver Collar, and attach

a 10 foot leash.

2. Hold the leash and the Remote Transmitter in one hand. Keep your other hand free to guide

your pet into a “Sit” position.

3. Press the Center or Lower Button (Spray Stimulation).

4. Immediately give the “Sit” command while continuing to hold the Center or Lower Button (Spray

Stimulation).

5. Release the Center or Lower Button (Spray Stimulation) as soon as your pet is in position. Press

the Tone (Upper Button) and praise him.

6. Release your pet from the “Sit” command and play.

7. Repeat Steps 2 through 6.

Note: If your pet breaks the “Sit” command, repeat steps 2 through 5. Keep your pet close to

you while teaching the “Sit” command.

The “Recall” Command

1. Put a separate, non-metallic collar on your

pet’s neck BELOW the Receiver Collar, and

attach a 10 foot leash.

2. Hold your leash in one hand and the Remote

Transmitter in the other.

3. Wait for your pet to walk away from you.

4. Press the Center or Lower Button (Spray

Stimulation) while saying “Recall” and if

necessary, use the leash to guide your pet

toward you.

5. Immediately release the Center or Lower

Button (Spray Stimulation) as soon as your pet steps towards you.

Press the Tone (Upper

Button) and praise him.

6. Quickly move backwards as your pet begins to walk toward

you, praising him the entire time.

7. Repeat Steps 3 through 8.

8. Once your pet responds readily to the “Recall” command

several times, back away from him without giving a

command. When your pet turns toward you, give the

command “Recall” (WITHOUT SPRAY STIMULATION) and

praise him while you continue to back up. Stop moving

backwards and praise your pet when he returns to you.

9. Use your leash to prevent your pet from running past you. If

your pet manages to run past you, repeat Steps 3 through 8.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Petsafe PDT00-13913 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info