Bedienungsanleitung Petsafe Treat and Train (Seite 14 von 55) (Englisch)

766103

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

26 27

4) With the battery compartment still open,

choose the remote control channel that matches

the channel you set the base unit to in Step 2.

5) Open the system’s food bin lid. Place the

disc that fits the size of kibble or treats

you will be using. The Treat&Train™ system

requires dry dog food, dry treats or semi-

moist treats that fit through the food disc

holes on either the large or small-sized

kibble disc. Round or oval-shaped treats or

kibble of uniform size work best. See a list

of foods that work well in the Treat&Train™

system at https://drsophiayin.com/app/

uploads/2016/01/tnt_dog_foodsm.pdf.

6) Load the food bin with 1-2 cups of food.

Since your dog will be earning his meals out of

the system, fill the machine with approximately

one meal’s worth of food.

NOTE: If you hit DOWN-STAY, the light on the base unit will turn on. To turn it

off, hit the DOWN-STAY button again.

10) Test whether the food is the optimal size for dispensing. When food is too

large, gets stuck, or does not make it into a disc hole, the disc will continue to

spin until the next hole can dispense its treat. When food is the right size for the

disc, it will dispense from every hole. Press DISPENSE 20 times in a row to see

if treats are dispensed with each hole or if the machine sometimes skips one or

more holes. If it skips more than one or two times, try a different size, shape or

texture of food.

3.4 Overview of the Control Panel

The control panel has basic controls and more advanced down-stay settings you

won’t need until Game 3 (Down-stay stage) of training.

On-off switch: Turns the base unit on and off. Set it to ON for all system operations.

Indicator light: Turns green when the unit is on. If it’s red it indicates the batteries

are low. A slow, blinking green power light indicates the unit is in sleep mode—

which occurs after 30 minutes of non-use. To wake up the Treat&Train™ system

press any button on the remote.

DOWN-STAY CONTROLS AND LIGHT

Single treat setting: Dispenses one treat at a time when DOWN-STAY mode is

activated (see below).

Multi-treat setting: Dispenses treats 5 times in succession when in DOWN-STAY

mode.

Cue dispense setting: Alerts you when to press the DISPENSE button during

DOWN-STAY mode. In this setting the timer will beep, but food won’t dispense

until you press the DISPENSE button.

Fixed or variable switch: Determines whether treats are dispensed at the

fixed time interval chosen on the TREAT RATE dial or on a more unpredictable

interval—one that averages the interval chosen. In most of the down-stay

exercises (Games 3 and 5) the switch is set to FIXED and each trial lasts one

minute. When set to VARIABLE, the down-stay repetition continues until the

machine is out of food.

TREAT RATE dial: Determines how frequently treats are dispensed during a

down-stay session.

Down-stay light: Indicates that the DOWN-STAY button on the remote control

has been pressed and the machine is in a down-stay session and is set to

dispense treats according to the timed TREAT RATE dial settings (e.g. for

Games 3 and 5). If the Down-stay light flashes on and off, check for dispenser

jam or see if the unit is empty. The unit will beep and the light will flash for one

minute before turning off automatically.

CHAPTER 3

Set-Up and Control Panel Instructions

CHAPTER 3

Set-Up and Control Panel Instructions

Remove the Treat&Train™ system when not in use until your dog has

completed Game 5 of training.

7) Turn the POWER on (dog should be

away from the machine). This will cause the

control panel indicator light to turn green.

If it’s red it indicates the batteries are low. A

slow, blinking green power light indicates the

unit is in sleep mode—which occurs after 30

minutes of non-use. To wake up the system,

press any button on the remote.

8) Set the VOLUME to “off” if the dog is in

the room. Some dogs need to get used to the

movement of the machine before they are

comfortable with the machine also emitting

a tone.

Ignore the DOWN-STAY controls. They are discussed in the next section.

9) Test the treat dispensing: Hit the

DISPENSE on the remote control to

dispense kibble. The treat should drop

into the treat bowl within a second. If

you hold the DISPENSE button down,

treats should continue to dispense until

you stop pressing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Petsafe Treat and Train Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Petsafe Treat and Train

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info