Anti-Theft Device *
- Removal of anti-theft device
- Put the key into the lock, turn it , and pull the protective
flap in order to remove the anti-theft device.
- Locking the anti-theft device
(the key must be in the lock).
Unclip part from its housing, slide it along the cable,
wrap the cable around a fixed point (metal post, 2-wheeler
parking stand, ....)
- Turn the key and insert part into part ,
- Turn the key , remove it and make sure that
the protection flap is correctly in position.
- Storing the anti-theft device
- Put the key into the lock, turn it and separate parts
and .
- Slide part along the cable and store it away in the
housing of part .
- Push the whole unit until it is positioned in the rear part of
the scooter.
- Withdraw the key and make sure that the protection flap
is closed correctly.
Advice
- When the scooter is parked, avoid leaving the anti-theft
device in contact with the ground.
- When cleaning the scooter, avoid pointing the water hose
into the lock.
- Maintenance of the tube : use a plastic siliconed cleaning
product.
Caution
Do not forget to store the anti-theft device carefully in its
housing before using the vehicle.
Placing the theft protection device around the rear wheel
may damage the number plate.
Recommendations for
protection against theft
Use an additional good quality theftproof device.
A treated steel hook rigidly attached to the frame can
be used with a locking device to anchor your scooter to a
fixed point (for example a post).
* According to the model
15
1
1
2
3
1
2
1
2
3
1
2
1
3
L
*
L
*
