Elystar ADV 4
Temps
A
F
E
A
12
H
B
A
B
C
D
G
D
C
G
F
E
H
Lighting and signalling
Lighting and signalling equipment in good working condition
is essential for safety.
Check the various lamps from time to time before
starting and when using your scooter to make sure
that they are working as they should.
- Lamp characteristics
Headlight/Diplight .............................. H4 60/55W P43T38
Rear light and brake light ...................... P 21/5W BAY15d
Turn signal lights ......................................... R10W BA15S
Number plate light ............................................ W5W(T10)
Side lights ........................................................W5W(T10)
All lamps are 12 volts
See your dealer or distributor immediately if one of the
lamps is not working properly.
- Changing the bulbs
FRONT BULBS
- Remove the 5 screws from the front panel
- Tip the fairing forward
- Change headlight bulb
- Change sidelight bulbs
- Change indicator light bulbs
- Refit fairing correctly (fitting of parts)
- Tighten the 5 screws
To adjust the headlight : unclip the container in the
bottom of the LH side glove compartment and turn the
adjustment screw in order to set the vertical
orientation.
REAR
Rear light :
- Remove the 2 screws and the lens
- Change the bulb
Indicators :
- Remove the screw and the lens
- Change the bulb
NUMBER PLATE
- Remove the screw
- Remove the 2 support screws from the bulb holder
cover
- Change the bulb
